sagent Posted February 6, 2013 Share Posted February 6, 2013 I have a 2011 and in the last 3 weeks the "service traction control " message has come up on the dash. Anyone else have a problem with this ? The first time was pulling out of a baitshop which had me spinning all four wheels pretty fast, the second time was cruising down a road about 20mph ? Dealer said something about icing, I assume on the wheel speed sensors. I will be bringing it in soon as warranty ends in about 400 miles Link to comment Share on other sites More sharing options...
gmtech4 Posted February 6, 2013 Share Posted February 6, 2013 theres a code to be diagnosed ,no one knows what it is and its warranty any ways ,,,,let know for giggles what they find check owners manual for more info on DIC messages Link to comment Share on other sites More sharing options...
11hennesseysilverado Posted February 6, 2013 Share Posted February 6, 2013 don't wait until warranty ends if you can help it ! out of warranty means out of pocket repairs ! good luck ! Link to comment Share on other sites More sharing options...
tanked_darren Posted February 6, 2013 Share Posted February 6, 2013 I have a 2011 and in the last 3 weeks the "service traction control " message has come up on the dash. Anyone else have a problem with this ? The first time was pulling out of a baitshop which had me spinning all four wheels pretty fast, the second time was cruising down a road about 20mph ? Dealer said something about icing, I assume on the wheel speed sensors. I will be bringing it in soon as warranty ends in about 400 miles Why would you bring it in after the warranty Sent from my Nokia 5190 using Tapatalk 2 Link to comment Share on other sites More sharing options...
txab Posted February 6, 2013 Share Posted February 6, 2013 Why would you bring it in after the warranty Sent from my Nokia 5190 using Tapatalk 2 I think he meant: I will be bringing it in soon, (comma) as (the) warranty ends in about 400 miles Link to comment Share on other sites More sharing options...
tanked_darren Posted February 6, 2013 Share Posted February 6, 2013 I think he meant: I will be bringing it in soon, (comma) as (the) warranty ends in about 400 miles I should have read closer soon and as position should have gave that away Sent from my Nokia 5190 using Tapatalk 2 Link to comment Share on other sites More sharing options...
GMCustomerService Posted February 7, 2013 Share Posted February 7, 2013 sagent, Keep me posted regarding your concern. Feel free to contact me if you need additional assistance. Thank you. Tricia, GM Customer Service. Link to comment Share on other sites More sharing options...
sagent Posted February 9, 2013 Author Share Posted February 9, 2013 Had the truck at the dealer yesterday. No codes / problems found by dealer. I thought if these error messages come up it automatically threw a code? At least its been documented by dealer in case something comes up again in the near future. Link to comment Share on other sites More sharing options...
GMCustomerService Posted February 11, 2013 Share Posted February 11, 2013 Let me know if this reoccurs sagent. Contact me privately if you need anything in the meantime. Tricia, GM Customer Service. Link to comment Share on other sites More sharing options...
gmtech4 Posted February 11, 2013 Share Posted February 11, 2013 from the GM service manual,the last one is the kicker Action Taken When the DTC Sets One or more of the following actions may occur: • The EBCM disables the antilock brake system (ABS)/traction control system (TCS) and vehicle stability enhancement system (VSES) for the duration of the ignition cycle. • The ABS indicator illuminates. • The StabiliTrak indicator illuminates. • The driver information center (DIC) displays All Wheel Drive Off/Service Traction Control/Service StabiliTrak message. <a href="http://gsi.xw.gm.com/newsi/showDoc.do?laborOpCode=&docSyskey=2038306&cellId=174250&pubObjSyskey=3606462&from=sm&pubCellSyskey=1644972#N65696"> Conditions for Clearing the DTC • The condition for the DTC is no longer present. • The EBCM clears the history DTC when a current DTC is not detected in 40 consecutive drive cycles Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.