Jump to content

Tow Mirrors


Recommended Posts

  • Replies 534
  • Created
  • Last Reply

has anyone been able to keep there spotlights on in reverse without changing the wiring?

 

Do the diode trick.

 

http://www.gm-trucks.com/forums/topic/164156-cargo-lights-on-with-reverse-lights/?p=1495649

 

http://www.gm-trucks.com/forums/topic/164156-cargo-lights-on-with-reverse-lights/?p=1495731

 

I did it on my truck (early build 15 HD) and it works. They are off in park, off in neutral, and automatically triggered with the reverse lights. If you have your exit lighting turned on as well, they will come on also. Park and neutral you have to hit the cargo lamp switch as usual.

Link to comment
Share on other sites

  • 4 weeks later...

Has anyone found a website that actually gives a description for the wiring harness needed for the doors. I tried to look up the numbers stated earlier in this topic but I can't find the description. Has anyone upgraded there harness from power, heated too power, heated, and turn signal? If so what harness did you use?

Link to comment
Share on other sites

Check out the thread 2014/15+ HD PowerFold OEM Tow Mirrors Start on Pg.75. There is a chart on the page.

Thank you for the link but I don't know what the abbreviations are.

Link to comment
Share on other sites

Has anyone found a website that actually gives a description for the wiring harness needed for the doors. I tried to look up the numbers stated earlier in this topic but I can't find the description. Has anyone upgraded there harness from power, heated too power, heated, and turn signal? If so what harness did you use?

wiring harness 23171562 for the driver door, and 23171565 for passenger

Link to comment
Share on other sites

I thought i've seen a post in the past about these mirrors on ebay that say 07-13 but i thought some were using them on 14+ can someone point me in the right direction or give a little advice?

 

http://www.ebay.com/itm/161890536480?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

 

Those mirrors in the link are for a 2013 truck and will not work for 2014 which your profile states you have.

Link to comment
Share on other sites

  • 2 weeks later...

I have a 2015 2500HD LT manufactured 3/2015. It is a AVF minus A45 and came with DPN mirrors. The truck also had the 23171572 & 23171566 harnesses. I am switching to DSQ mirror due to garage door opening clearance. I have installed the following:

23241465 & 2324167 mirrors
23488411 driver side powerfold switch
23147589 switch harness. It is the memory compatible wiring but the only one the fits the switch connector.
23245541 passenger window switch
23147593 passenger switch harness
The original functions of amber lights and cargo/LED lights work. BUT, no power fold or power adjust. I noticed that only a few of the pins in the 23171572 & 23147589 connector ends mate in active slots.
Have I missed a part or do I just need a BCM flash.
Thanks for your help.

Link to comment
Share on other sites

  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.