Jump to content

20" wheel and tire combo with 4" lift


jonny5172

Recommended Posts

I have been doing search after search to find a good wheel combo that will fit my truck.It is a 2011 LTZ Silverado Crew Z71.It has a 4" Rancho lift and currently 17x9 with a -12mm offset and 33x12.5 Tires that are shot.

Im looking at doing a 20x9 with a 295/60 or sticking with a 33 12.5 but it seems like there is plenty more room.Another option is to go with a 18 or stick with the 17's and run a 285/75/17.Any help on what will fit or opinions on what would look good are much appreciated.

 

I attached a couple pics of when the truck was new.

 

 

post-130135-0-23395500-1398272638_thumb.jpg

post-130135-0-15068800-1398272645_thumb.jpg

post-130135-0-23395500-1398272638_thumb.jpg

post-130135-0-15068800-1398272645_thumb.jpg

post-130135-0-23395500-1398272638_thumb.jpg

post-130135-0-15068800-1398272645_thumb.jpg

post-130135-0-23395500-1398272638_thumb.jpg

post-130135-0-15068800-1398272645_thumb.jpg

Link to comment
Share on other sites

Truck looks good, I would stick with the 33's I'm running 35 nitto mud grappler on 20x9 black XD revolvers and they scrub bad when I turn I've actually lost a little of my turning radius and I only have the 3 inch on the front but I don't think 1 inch more will change anything. Almost forgot my rims are 20x9 +18 offset 5.71 back spacing.

Link to comment
Share on other sites

Thanks for the feedback.Yeah,I would not attempt a 35 on a 4" lift.The 295/60 is closer to a 34" 11.5.So the 1" shorter plus 1" more lift it would probably be close the offset is +1 MM

Link to comment
Share on other sites

Well I just went to the place that installed my lift.I bought the truck new but the dealer had it installed months before I bought it.It's actually a 6" but written up as a 4" for insurance reasons.So Im going to do an 18x10 with 35s problem solved.

Link to comment
Share on other sites

Here's mine with a 4" Rancho, 1.5" body lift, 18x10 & 325/65/18(35x12.50) and it rubbed so bad I had to trim metal cab side. Just a heads up it's probably going to rub pretty bad judging from my experience, looked great though!

DSC00606.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.