Jump to content

Mike1220's 2014 Sierra


Mike1220

Recommended Posts

Okay so I got the truck about 2.5 months ago. I got a CC SB 2014 Sierra SLT white diamond tricoat with black interior. I got almost every option with the exception of the rear sliding window. Don't like the 3 broken windows.

 

Here's how it came from the dealer:

 

Magnaflow car back dual exit under the rear with 18" muffler

Skyjacker level kit

AFE Power Air Intake

 

Here she is sitting next to my old ride. 2002 Yukon XL Denali

 

ahajyryg.jpg

3e6eva3u.jpg

 

 

 

Within the first couple weeks I purchased and installed a bed rug and BAK Roll-X tonneau cover

 

vahuhemy.jpgva4ypure.jpg

 

 

 

Next was the addition of under the good light since GM decided that it was impossible for you to want to see the engine bay at night or in low light areas

 

yteryju6.jpgpu5upubu.jpg

(In the second picture, the ONLY light that is on are the 2 light pods I added. They, along with the switch used, came from XKglow.com. They are the small 6 LED pods. Link here: http://www.xkglow.com/6_LED_Ultra_Bright_Motorcycle_Light_Pod_8pc_Pack_p/xk084001-8.htm)

 

 

 

After that came bed step lights and an extra set of OEM bed lights, although the second set of OEM lights did not quite match the ones that came in the truck :/

 

8udu8abe.jpgyteha6ad.jpg

8y3uju3y.jpg

 

The second set of bed lights really help add some needed light up front

 

 

Along with the bed lights I changed my reverse and cargo lights to 50W LEDs!

 

9eheraju.jpgyjutebun.jpg5amesu8u.jpg

That tshirt is about 30 Ft away sittin on the back of a Lexus, that is to help show just how bright these lights are! And these cell phone pictures do them no justice!

They don't completely look like it, but they are white for both! They, IMO, perfectly match the interior lights and the LED DRLs so I'm happy!

Here are the bulbs:

yjuvatyv.jpgura3yzar.jpg

 

 

 

Being the light freak I am, I slept added footwell lighting that activate with the dome lights

 

8y5evyqe.jpg

by3ajy4y.jpg2y3ypubu.jpg

 

After that I went on to the brightest change in lighting

 

DDMtuning.com 55W 5,000K HIDs with wire harness (no error code eliminators were used. Some said to get them so I did, but when I went to use them, they blew and the lights work fine for me without them so I'm not gonna worry about them)

 

4ura9u2y.jpg

y3yragu6.jpgrametese.jpg

HIDs perfectly match the LED DRLs, when I saw that I was so excited! With my OCD, I already had a cart ready with another set of HIDs that would hopefully match the DRLs if these didnt, but thankfully they matched perfectly!

 

 

 

And that should bring all the mods up to date. If I remember anything I'll post it up when I can!

 

 

Future modifications include, but certainly aren't limited to:

 

30" or 40" LED bar behind grille

 

LED courtesy / puddle lights that span the length of the step plate

 

AMP research running boards

 

4" lift kit (most likely Rough Country so I can keep my stock rims, I've become a big fan of them)

33" or 34" tires when I get the lift

 

Currently retrofitting a projector fog light housing into my fog lights so I can run HIDs without blinding others

 

Driver assist handle, or as I prefer to call it, the "oh sh*t handle"

 

May change out my windshield mount iRadar for an under the hood iRadar

 

Stealth mounted wireless charging pad under center console instert

 

More xkglow LED pods, I'll install 1 per wheel well for extra light around the truck when working at night and Incase if I have a blow out at night while traveling on the highway. I will hook the lights to work with the bed lights, just as I did with the bumper step lights

 

*TBD*

 

If you guys have any suggestions on modifications, any thoughts on parts to use for modifications I have mentioned, or any way to make my current mods better, feel free to share! I'm currently studying to become an Engineer so I'm always up for improving the technology that we have!

 

 

Sent from my iPhone using Tapatalk

Edited by Mike1220
  • Like 8
Link to comment
Share on other sites

Oh and here's a picture after I cleaned her up the other day. Gotta love tire shine.

 

e3yzyqa3.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Went ahead and put in a small extra light in the console. I noticed last night that it's pretty dark in there even with the stock LED in there.

 

Before

avarejes.jpg

 

 

After:

ute6ybed.jpg

 

It's not overbearing bright, but it certainly helps to see everything in there. It is one of the XK pods I mentioned in the first post and have used in several other places. These little things are pretty nice.

 

For install. All I had to do was pull up the rubber mat at the bottom of the console, unscrew and remove the access plate that is hidden under the mat, then I pulled out the stock LED and unclipped the wiring harness so I would have more room. Then, wire spliced to it. Then I just out everything back how it was in the first place. Took 20 minutes. Very easy but very helpful

 

 

Sent from my iPhone using Tapatalk

 

 

Sent from my iPhone using Tapatalk

  • Like 3
Link to comment
Share on other sites

Went ahead and put in a small extra light in the console. I noticed last night that it's pretty dark in there even with the stock LED in there.

Beforeavarejes.jpg

After:ute6ybed.jpg

It's not overbearing bright, but it certainly helps to see everything in there. It is one of the XK pods I mentioned in the first post and have used in several other places. These little things are pretty nice.

For install. All I had to do was pull up the rubber mat at the bottom of the console, unscrew and remove the access plate that is hidden under the mat, then I pulled out the stock LED and unclipped the wiring harness so I would have more room. Then, wire spliced to it. Then I just out everything back how it was in the first place. Took 20 minutes. Very easy but very helpful

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

It's Looking Good.

Link to comment
Share on other sites

Thanks y'all! I'm a bit of a lighting freak! You can definitly tell by my last vehicle, but this truck won't be anything like the last one cause the last one was a bit overkill!

 

I had an underbody kit (that eventually broke due to improper installation), 2-12" RF T1's in the back power by a RF 1500W constant power amp, interior 7 color footwell lights in the front and rear, changed all the dome lights to LED, LED strips under the headlights to mimic an Audi or Lexus (at the time, but now it mimics our trucks too), tailgate bar break light, LED license plate frame, mud flaps with brake lights. Like I said, it was a bit overkill on the lights, but this truck won't have half of those. This one is staying classy and the only mods are gonna be useful ones. Not ones for shiggles

 

The last picture is probably my favorite picture of my old yukon.

 

dume7udu.jpgunavumys.jpgtatesera.jpgzu2yvyhy.jpge5urame4.jpgu7utytyr.jpgavepuzyz.jpg

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

Haha thanks Aaron! Never was told it looked like a command post. Got told more that it looked like spic mobile or a pimp mobile lol.

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

du8erehe.jpg

 

Ordered bull bar yesterday and plastidipped grille emblem and the plastic trim that front license plate mounts too. Also I truck bed lined the black plastic pieces that the two hooks sit in. Looks good. I'll have it all back together later on and will post up some pics.

 

Can't wait to see how it all comes out in the end! Still need to glossify the emblem.

 

 

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

du8erehe.jpg

 

Ordered bull bar yesterday and plastidipped grille emblem and the plastic trim that front license plate mounts too. Also I truck bed lined the black plastic pieces that the two hooks sit in. Looks good. I'll have it all back together later on and will post up some pics.

 

Can't wait to see how it all comes out in the end! Still need to glossify the emblem.

 

 

 

 

Sent from my iPhone using Tapatalk

don't forget to post the pics.
Link to comment
Share on other sites

I won't! I had to put another layer of paint on parts of the emblem before I left for work

 

Here's what it was like after I sprayed it and before I left

 

y6e7a5eb.jpg

 

 

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.