- 0
04 gmc sierra 2500hd c0110 abs code
-
Recently Browsing 0 members
- No registered users viewing this page.
-
Forum Statistics
246k
Total Topics2.6m
Total Posts -
Member Statistics
-
Who's Online 19 Members, 1 Anonymous, 1,633 Guests (See full list)
Question
04sierra2500hd
i recently had the abs light come on. the one front bearing had a decent amount of play in it. so i replace that hub/bearing/sensor, thinking thats the problem. brought to a shop to have the code cleared. turns out it has a c0110 Pump Circuit Malfunction code. i was able to split the module from the pump. i ohmed the 2 prongs for the pump motor and got 0.0 ohms. so i would say the pump is good. i opened up the module hoping to find a bad solder on the board, but didnt find any burnt spots. so i sealed it and put it back on. when i plug it in it makes a buzz noise for a split second then stops. i tried cleaning the ground on the frame rail but that didnt work. any help would be greatly appriciated.
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.