Jump to content

17" wheel stock offset


skennel23

Recommended Posts

Does anyone have an idea of what the stock offset is on a 2014 Silverado 17" wheel?

 

How wide is your wheel? If it's 8" wide your offset would be around +40mm. My OEM 18's are 18x8 and my offset is +44mm. We'd have to see a pic of the wheel to give an estimate or you can remove the wheel and the info should be stamped on the inside. If all else fails go down to your local dealer parts dept, give them the last 8 digits of your VIN and they should have all the wheel info for you.

Link to comment
Share on other sites

In the past all GM wheels were +31. 17's are 7.5" wide as well.

 

New trucks are 8 inches wide. All the wheels for 2014 are .5 inch wider than the outgoing truck.

How wide is your wheel? If it's 8" wide your offset would be around +40mm. My OEM 18's are 18x8 and my offset is +44mm. We'd have to see a pic of the wheel to give an estimate or you can remove the wheel and the info should be stamped on the inside. If all else fails go down to your local dealer parts dept, give them the last 8 digits of your VIN and they should have all the wheel info for you.

 

You have an HD. Offsets are different.

Link to comment
Share on other sites

You have an HD. Offsets are different.

Thanks for enlightening me. Since the OEM HD wheel uses a different design than an OEM 1500 wheel, of course the offset would be different. I merely used it as a reference to how much offset there could be on an 8" wide wheel. Naturally offset is going to vary depending on the wheel design. Normally OEM GM wheels have a high (I would say more than +20mm) positive offset.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.