Jump to content

2015i Tahoe MyLink 14.0F105 newer than 14.1F013?


Recommended Posts

Hello.


I have a 2015i Tahoe and I'm trying to determine the latest version/build of the HMI software.


Mine is showing 14.1F013 with a build timestamp of 03/13/2014. The Tahoe was built in December 2014.


We've had lots of iPhone/USB connectivity issues, and after doing some research I found bulletin PI1375C:




This bulletin states after January 26th, 2015 vehicles should have 14.0F105.


Looking at these version numbers, one would think 14.1F013 is newer than 14.0F105, however, the bulletin reads:


Note: The last 3 numbers will increase as the software gets updated. Those are the numbers to check when verifying software version.


The bulletin also displays a screenshot, showing 14.0F105 has a build timestamp is 09/24/2014.


If you go to Bosch's OSS GM page, they seem to have the packages listed in order:


GM Cadillac, Chevrolet, GMC, Buick and Opel MY16 HMI Module (SW 15.1A025*)

GM Cadillac, Chevrolet, GMC, Buick and Opel MY15 HMI Module (SW 14.0F105*)

GM Cadillac, Chevrolet, GMC, Buick and Opel MY15 HMI Module (SW 14.1F013*)

GM Cadillac, Chevrolet, GMC, Buick and Opel MY14 HMI Module (SW 12.6N185*)


And if you dig into the license PDFs:


MY15_M6_FINAL-14.0F105.pdf is dated on October 1st, 2014

MY15_M5-14.1F013.pdf is dated on March 6th, 2014


I took the Tahoe into the dealer today, and they told me tis2web is showing the latest downloadable software as 14.1F013.


I'm not trying to be difficult with them, but it's hard to believe considering the research and evidence from above.


Are there any techs that can confirm this?


Or does anyone have a Tahoe built after January 26th, 2015, that can check their version? (Power+Menu+Home)


Thanks,

Jason

Link to comment
Share on other sites

  • 5 months later...

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.