Jump to content

Recommended Posts

Information on Vibration Analysis and Diagnostic 2014/2015 Chevrolet Silverado and GMC Sierra

 

 

This seems to be a vibration campaign that has been around since January 2015. I have seen many complaints on different forums about this issue. I also have a vibration/harmonics issue that is not there all of the time but most. My issue seems to be centered around the V4 decel, and body mount configuration. This link is filled with a ton of information about various causes and repairs many of the 2014/2015 GM truck owners are experiencing. Some may be experiencing a combination of more than one issue at a time. Many more may not be experiencing any vibration at all. I do believe for those folks with the "Cadillac ride" its only a matter of time before they start experiencing vibration/harmonics issues. Its kinda nice to get this information out so that GM can streamline the repair process even further. If enough of these trucks show up for repair request for vibration they may even send out letters to further enhance quality control.

 

http://oemdtc.com/6392/information-on-vibration-analysis-and-diagnostic-2014-2015-chevrolet-silverado-gmc-sierra/3

 

If link does not work copy and past in your browser.

Edited by fireaxxe
  • Like 4
Link to comment
Share on other sites

Yes because of this well written article I was able to identify one of my issues. My shocks were produced before the A14743C date. I removed them and checked and sure enough when compressed they have no resistance for the first couple of inches if shock rod movement. I can also see grease leaking from my U-Joints, the one on the front propeller shaft and the front U-Joint on the rear propeller shaft (drive shaft) is leaking the worst.

  • Like 1
Link to comment
Share on other sites

Like you I have been to the dealer several times over this issue. With this new information I was able to stop by and give them specifics on what I want done. They agreed and will have the truck tomorrow morning.

Link to comment
Share on other sites

I had to revive this before it slipped to the bottom. I read all 4 pages and if I had this vibration issue, I would print this out and take it to the dealer.

 

>>>>>>Vibration Analysis<<<<<<

Edited by TDT
  • Like 1
Link to comment
Share on other sites

I had to revive this before it slipped to the bottom. I read all 4 pages and if I had this vibration issue, I would print this out and take it to the dealer.

 

>>>>>>Vibration Analysis<<<<<<

 

Thats what I did, I even told them to keep the copy of the paper. The service writer highlighted all the areas that fit the description of the various vibrations I was describing then gave it to the foreman. About 15 min later he requested that I take a test drive with him and point out the details. They gave me a loaner, my truck hit the lift and a day later they called and said several parts were on order and will be at the dealership hopefully by Tuesday. This was my 5th trip to the dealer for the same complaint. Its amazing how powerful the written word can be.

Link to comment
Share on other sites

 

Thats what I did, I even told them to keep the copy of the paper. The service writer highlighted all the areas that fit the description of the various vibrations I was describing then gave it to the foreman. About 15 min later he requested that I take a test drive with him and point out the details. They gave me a loaner, my truck hit the lift and a day later they called and said several parts were on order and will be at the dealership hopefully by Tuesday. This was my 5th trip to the dealer for the same complaint. Its amazing how powerful the written word can be.

How on earth did they not have knowledge of this old bulletin before?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.