?remove lower portion air filter box to change bulb on 2016 Burb

[ymc226]

Recognizing the light output is not the best, I read the various threads (this and this) and ordered the Phillips Xtreme Vision bulbs.

 

Following the instructions in the manual, the driver side bulb was changed easily.

 

On the passenger side, I removed the engine air filter cover and filter but enough of the bottom part of the filter box still is in the way so there is no easy access to the back bulb cover.

 

For you that have changed out the low beams, how did you remove the bottom air filter box?

[newdude]

Pull and slide it out. Its just rubber grommets that hold it in. One grommet slides into a slot in the box pan.

[ymc226]

Thanks 15HDriver,

 

Can you tell me which direction and how to pull and slide or lift. Looking into the fender side of the inside of the box, there are 3 squeeze tabs to release the box which I broke one off already. I "released" the remaining 2 clips, then tried to lift and slide toward the direction of the driver side but it wouldn't budge. I just don't want to break the box and make the truck undriveable.

 

Are the grommets you refer to on the fender side of the air box (vertical side) or on the bottom?