Jump to content

95 K1500 4-Wheel Floor Shifter is Locked in 2H


Recommended Posts

I've had this 95 GMC K1500 for a few years now and haven't had use of my 4 wheel drive for most of the time. When I bought the truck I could shift into 4H but it was difficult. To shift into 4L was nearly impossible. By the time winter rolled around I tried to throw it in 4H and the lever wouldn't budge. The shifter is completely locked in 2H. Any idea what the issue could be? I haven't been able to find much on this issue.

 

Thanks.

Link to comment
Share on other sites

Climb under your Burb and see if something is jammed in the linkage(like a rock or similar).If it's clear have someone operate the shifter while you watch what the linkage does(use wheel chocks or wood blocks so it won't roll over you :)) Keep in mind the vehicle must be moving slightly for it to shift.Maybe disconnect the linkage and try to shift it at the transfer case,I would assume it should move some.I've never tried any of these methods but it's what I would do if mine was acting like yours.Hopefully there's nothing wrong internally.

 

Maybe someone else has an idea...

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.