Jump to content

2015 GMC Sierra - Brakes cooked at 16k miles. How...?!


Recommended Posts

I drive a bit spiritedly, but can it really be possible that I need to replace my front brake pads at 16k? Has anyone else around here had theirs go so quickly? I have a lead foot, I'll readily admit that, and thus I brake a little more aggressively than most... but I really can't believe they're grinding at 16k. I had a 2009 Avalanche and rode it pretty hard for ~40k miles before I had to touch the brakes!

 

Thoughts?

 

 

 

 

Link to comment
Share on other sites

I drive a bit spiritedly, but can it really be possible that I need to replace my front brake pads at 16k? Has anyone else around here had theirs go so quickly? I have a lead foot, I'll readily admit that, and thus I brake a little more aggressively than most... but I really can't believe they're grinding at 16k. I had a 2009 Avalanche and rode it pretty hard for ~40k miles before I had to touch the brakes!

 

Thoughts?

 

 

 

 

Something don't seem right. I have a 15 sierra with 18,000 on it and pads still like new.
  • Like 1
Link to comment
Share on other sites

"How long should brakes last?"

That's like asking: How long should a roll of toilet paper last....... it depends on how you use it.

 

 

I and a coworker had identical F150's on our GPS Survey team. His needed new brakes at 15,000 miles and my truck went over 50,000 miles before the brakes needed repair. He was hard on everything he was assigned from engines to transmissions, trucks he drove had those problems, mine never did.

 

So you can't compare, its how the vehicle is driven.

Edited by elcamino
  • Like 7
Link to comment
Share on other sites

I drive like a maniac, in stop and go, along twisty country roads, tow occasionally and I just rolled up 60k with lots of pad left. Something doesn't sound right.

Yea, I'm thinking now maybe I picked up a rock or some sort of debris. I'm going to try to get my wheels off today to see exactly what's going on in there and report back. Again, I understand aggressive driving causes premature wear, but 16k just seems a little ridiculous.

Link to comment
Share on other sites

So they were definitely cooked. The inside brake pad on the driver was side was metal-on-metal. The passenger side was nearly there. The outside pads still had about half-life left. I still cannot believe these brakes went at 16k. I honestly cannot believe that I drive that aggressively, but I guess the proof is in the pudding. Time to slow down.

Link to comment
Share on other sites

So they were definitely cooked. The inside brake pad on the driver was side was metal-on-metal. The passenger side was nearly there. The outside pads still had about half-life left. I still cannot believe these brakes went at 16k. I honestly cannot believe that I drive that aggressively, but I guess the proof is in the pudding. Time to slow down.

Not buying it. You've got something else going on. Time to check everything starting with the slides since inside pad gone, outside half usually = frozen slides.

 

I really can't imagine the torture it takes to do this. Even "spirited" driving can't do that. This coming from a guy who has went through a set of brand new tires AND a set of pads in a day on the track.

 

That was an awesome day.

  • Like 2
Link to comment
Share on other sites

Are the 1500s that much different than the 2500s? I've got 100k on the OE pads and will probably get 150k before they need replaced? And that's towing, hauling, and commuting 100 miles a day.

 

Even driving spiritedly, I don't buy 16k. My Wife drives harder than most people, she still gets 30k on a set of brake pads...

 

Sent from my SAMSUNG-SM-G900A using Tapatalk

Link to comment
Share on other sites

When I traded in my 2010 Silverado it had 135k Mike's on the original brakes. I went to replace them at 100k and they had a lot of life left.

 

I have a set of OEM pads and shoes for it that I will probably list for sale. I figured if the originals lasted that long and were quiet why not replace with the same even if it costs a premium.

Link to comment
Share on other sites

Not buying it. You've got something else going on. Time to check everything starting with the slides since inside pad gone, outside half usually = frozen slides.

 

I really can't imagine the torture it takes to do this. Even "spirited" driving can't do that. This coming from a guy who has went through a set of brand new tires AND a set of pads in a day on the track.

 

That was an awesome day.

 

 

Almost sounds like a bad master cylinder that's holding pressure after the pedal is released...not sure if the abs unit would cause this also?

 

Sent from my SAMSUNG-SM-G900A using Tapatalk

Hmmm... I'll have to get this checked out. This is something the dealer should have no problem checking for me, right? Being that I just got the truck in Dec. of 2015.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.