Jump to content
  • 0

Scan tool


Swimmer8366

Question

There has to be someone out there that knows what scan tools will allow us to do crank relearn and ecm programs for installs etc. Other than tuners and a tech 2. Want to buy a good scanner that will also get used on other vehicles as well as my own.

 

Sent from my Z981 using Tapatalk

Link to comment
Share on other sites

Recommended Posts

I bought the $400 Chinese tech2 copy off eBay. I have done two gen3 crank variation relearns, an auto climate temp sensor, two front impact sensors, and a fuel level sensor. If it broke tomorrow I wouldn't cry. I also tried the crank relearn through my hp tuners, it doesn't work the same as the tech2. I have fixed a few things with the hp tuners, but it is limited, no srs, abs, or bcm.

http://m.ebay.com/itm/Win10-Tablet-Vpecker-Special-Function-As-X431-OBD2-Code-Scanner-Diagnostic-Tool-/292034297357?_trkparms=aid%253D222007%2526algo%253DSIC.MBE%2526ao%253D1%2526asc%253D20150519202348%2526meid%253D6bd5ac3dc3d84c33bebfc7036dbef68d%2526pid%253D100408%2526rk%253D8%2526rkt%253D25%2526sd%253D151999906912&_trksid=p2056116.c100408.m2460

 

 

Found this any experience on this?

 

Sent from my Z981 using Tapatalk

Link to comment
Share on other sites

Can you tell me exactly how that works with that tool how costly is it??

 

Sent from my Z981 using Tapatalk

 

If you want to do many different product lines.. http://www.drewtech.com/products/cardaqplus.html $1680

 

If you just want to do GM .. http://www.drewtech.com/mongoose/gm2.html $495

 

So the scan tool rental works with the purchase of a subscription. Toyota and GM Run about $60 for 48 hours of use. You can rent the Tech2win and use it with the pass thru. Basically the Tech2 is emulated on the computer.

 

If you want to just do older GM stuff the clone Tech2 should work fine. I have never used a clone but would not be afraid of buying one. I only use Tech2win as I have a yearly subscription but often find myself always looking at a scan tool.

 

If you want a robust scanner to do all makes and models get the ethos pro. The Solus edge is what I have on my table right now for testing stuff on the bench. Its also a fine unit that has a built in helper but I never use it. At the end of the day you have lots of scan tool options and everyone has a preference. I have used tons of scan tools my option for price and coverage and processor speed its snapon.

Link to comment
Share on other sites

 

If you want to do many different product lines.. http://www.drewtech.com/products/cardaqplus.html $1680

 

If you just want to do GM .. http://www.drewtech.com/mongoose/gm2.html $495

 

So the scan tool rental works with the purchase of a subscription. Toyota and GM Run about $60 for 48 hours of use. You can rent the Tech2win and use it with the pass thru. Basically the Tech2 is emulated on the computer.

 

If you want to just do older GM stuff the clone Tech2 should work fine. I have never used a clone but would not be afraid of buying one. I only use Tech2win as I have a yearly subscription but often find myself always looking at a scan tool.

 

If you want a robust scanner to do all makes and models get the ethos pro. The Solus edge is what I have on my table right now for testing stuff on the bench. Its also a fine unit that has a built in helper but I never use it. At the end of the day you have lots of scan tool options and everyone has a preference. I have used tons of scan tools my option for price and coverage and processor speed its snapon.

Would this work ?

https://www.ebay.ca/itm/301848649459

 

 

If I rent the software would I be able to work on my 2017 truck ?

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.