6.0l 2500hd swap to 4.8l

[Dustinthomas]

So over a year ago I wrecked my 1500 4x4 4.8 and bent the frame. At work I got the option to buy a 2500hd with the 6.0l has a blown tranny,and motor burns oil, so now I'm going to swap out the 6.0l to the 4

8 with my new 4l60e tranny. I'm curious to the drive shafts fiting, or axles fiting over. The pickup I wrecked has blown t case, new eaten locker rear end, tranny, motor, u joints, shocks, adjustable fuel pressure, programmed, and more stuff that I don't really know. Going from the 1500 to the 2500hd I don't want to switch just the rear end if the axle shafts are different sizes because it's going to be a pain to have 2 6 bolt tires and 2 8 bolt. Just wanted to know some info about the 2500hd axle splines. The locker is 32 spline

[Dustinthomas]

No ideas???

[Chris]

Depending on the trucks setup, driveshaft won't fit. 60e won't fit because the crossmember is in the wrong spot. 4.8 will be strung out to move that kind of weight

[06_GMC]

Sell everything you can from the 4.8 including motor and use money to rebuild tranny and 6.0 in 2500HD