Jump to content

How to remove brush on bed liner


Recommended Posts

You might get lucky and peel back a corner and pull it off if he didn't apply it right but most likely your going to have to break out the grinder. On the fiberglass top your pretty much screwed on that one unless you find someone that's good with a grinder.

Link to comment
Share on other sites

I would test different paint thinners, acetone, mineral spirits, xylene, toluene, etc....

 

I sprayed the inside of a toolbox with bedliner (aerosol can). It started peeling in spots, a little paint thinner dissolved it and it wiped out with rags. Test small areas to make sure it doesn't mess with the paint underneath.

 

Sent from my SM-T350 using Tapatalk

Link to comment
Share on other sites

If he scuffed the paint before he put it on (which you are supposed to do) then you may be screwed. Even if you could get it off the paint underneath will be scuffed so it will need to be repainted to keep from rusting.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.