Jump to content

Wheel Hub Assembly replacement.


Recommended Posts

Hey guys,

 

Not sure where to put this, however I recently purchased a 2015 HC 1500. It took a hit on the driver side wheel and it obviously got hit hard enough to set off some lights on the dash. After speaking with a GM tech, he said more than likely its the ABS wheel sensor speed since I have ABS light, service stability and traction lights on. So I got the replacement hub, my question is, is it a matter of just replacing and connecting up the harness and the lights go away or would I have to get someone with a ABS scanner to clear the lights? I am not in the US but I know of one person in my country with such scanner. No dealers here either. Any assistance is appreciated.

 

Thanks,

 

Keagan

Link to comment
Share on other sites

Lights will clear on their own. Codes still will remain until battery disconnected or cleared with a code reader. I wouldn't start throwing parts at it unless you have an idea where to look.

At least check parts with an ohm meter.

 

Sent from my LG-H812 using Tapatalk

Link to comment
Share on other sites

Lights will clear on their own. Codes still will remain until battery disconnected or cleared with a code reader. I wouldn't start throwing parts at it unless you have an idea where to look.

At least check parts with an ohm meter.

 

Sent from my LG-H812 using Tapatalk

Thanks! I will have them try that first.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.