Jump to content
  • 0

DL3 Mirrors


Goody15o

Question

I have a 2016 Silverado Z71 LT that came with DL8 mirrors. I purchased some DL3 mirrors (glass only) in hopes of upgrading. I took off the door frames and stock glass and realized I was missing the wires to the turn signals on the DL3 mirrors. Do you know where I can get the wire I need or do I need to buy the whole housing DL3 mirrors? Thanks!

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

Search these forums or send a PM to "pgamboa". He is the mirror guru and has figured out all the pins. He even makes custom harnesses that will make the mirrors plug-and-play.

 

EDIT:

Sorry - I just read Vicarod's post above. Phil is the pgamboa I was talking about.

Link to comment
Share on other sites

I suppose you could add the wire needed into your mirror harness.

 

There is someone selling a set of DL3's on the board for $250 and taking offers so he may take less....that's a phenomenal price.

They usually go for a bit over $300 / set.

That would give you power fold / puddle / signal and auto-dim..if you put the harnesses in for it.

 

Might want to read through this a bit as well.

I believe the connector p/n's will be mentioned in there that you will need to add.

http://www.gm-trucks.com/forums/topic/198157-2014-2017-dl8-dl3-towing-mirror-upgrade-mirrors-explained/

and also

http://www.gm-trucks.com/forums/topic/178860-how-to-install-dl3-mirrors-in-2014-lighting-only/

 

Note that Phil is the most comprehensive on this subject. Might want to PM him with your questions.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.