Jump to content

Blend Door Stuck on cold air


VandyJ

Recommended Posts

I have a 1999 chevy silverado 2500hd with a 6.0

 

The air was stuck on cold so I looked at the actuator and it is working properly. Both hoses in the engine bay are hot. I took off the actuator and tried moving the blend door and it is stuck. Any way to free the blend door so it will open with the actuator?

Link to comment
Share on other sites

  • 2 weeks later...

I had a similar problem last week. I was driving along on a hot day with the A.C. blasting away,when for NO apparent reason,the truck started blowing serious heat. I touched nothing previously to this. I shut it off to do a fifteen minute errand. Started it up,and it blew ice cubes again. I've been since told that the door can stick sometimes. I got at the door and sprayed the hinges hoping it'll help. The mechanic I ran this by said to switch from heat to A.C. now and then,twelve months a year. I guess it makes sense. When you get at that door spray it and move it (system off), back and forth. I used Fluid Film, it lasts AND stops corrosion.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.