4L60E-turbo 400 swap

[Badazz Z71/superduty]

I ricently rebuilt my 2001 z71 from the ground up, Dana 60 swap from and back 13" lift with 4.56 in front and rear. I went through 3 heavily built 4L60E's in a course of about 6 months so I ordered a built turbo 400 and installed no problems, fit on the bell housing minus the top bolt and fit in my existing crossmember. Driveshaft slid in all is good shifts through all 3 gears no problem. What I am asking is there someone that makes a kickdown cable with bracket and if there are any experts on here that know if there's any hidden computer issues with doing the swap.