Going through the dealer to buy the console will cost u more.. If your parts guy is nice he could sale it to u at wholesale ....my dealer did got the whole console for 600 ordered it on a Monday had every thing in on Thursday ..if I don't get home from work to late I'll take more pictures of the console.....also there is a wire harness that comes all ready installed on the new console ..that wire harness is pluged to the sd / 12v / usb on the back part of the console....in a truck with the console already there is a wire harness that come out of the dash and plugs to the console..trucks with out the full console dose not have the wire harness coming out of the dash...I'm working with my parts guy to find that wire harness ....so every thing can be plug and play....I'll take picture of when I get time to show everyone....if we could get someone who bought there truck with the full console to chase them wires down to se were they go in the dash that would help a lot ....
My old console under the lid there was two usb, sd card reader, 12 volt charger, and aux port I removed that wire harness off the old console. I used that harness to plug in to the 3 USB ports on the front of the new console. Under the lid of the new console there is two usb, sd reader, aux, and 12 volt charger.
That is the part numbers you will need,, the pull out cobby comes out open tray one screw there and two at bottom then it we'll come out .....the front of the console will slide in the cubby hole as for the plugs I had the jump seat with the usb in the console I toke the wire harness out of my old console in pluged it to the plugs up front of the new console still working on the plugs in the new console...