MMC

My stance has changed, last year I was going blind (Fuchs dystrophy) so suddenly self driving vehicles seamed like a good idea. Surgery and an organ donor helped me for now but if something were to change again I would like to have that option. I enjoy driving so unless I need it I don't want to be forced into it, but I do see it as a valuable tool for some.

You should get about 20 degrees delta T of cooling.

Speak with and have this documented with your service department, take an oil sample and have it tested then change the oil and cut open the filter to see how much metal is in it.

I have the 64 GB card and it displays the album art when I download from the Amazon Cloud.

I use the SD card in your post formatted to FAT32 and it works just fine, it will not work formatted to FATex.

Just pull the key part way out and reinsert and my chime stops.

I said keep an eye on the temp. because heat is the enemy of an automatic transmission and one of the few diagnostic tools you have. I also agree with you on how some of the reply's have been out of line.

Just keep an eye on the trans. temperature once they replace it, not much more you can do. Good luck and Thanks for your service.

I guess they had to offer it in a V6 to help with CAFE but really,a V6 1LE is not for me, that's just wrong. The cost or the gen6 is just getting crazy as it is, regardless of performance improvements I will be keeping my 5th gen.

You should be measuring from the lip of the wheel to the body not from the ground up.

If the booster fails or the vehicle stalls a higher pedal gives you more leverage to activate the service brakes.

Kramer?

Programming Transmitters to the Vehicle Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer. Each vehicle can have up to eight transmitters programmed to it. See your dealer for transmitter programming

Your welcome,Try rotating the nozzle slightly in different directions and/or not putting it in so far. Very common problem on many vehicles going back for years.

Trade it in If you are that lazy, Just sayin. Much safer an operation when you have to hold the nozzle and in many locations required by law.