Hey guys, quick HID question!
After reading most of the 44 pages of replies on this 2014 HID topic I learned a bit, but was still hoping to have some questions answered. I've been installing HIDs in my own vehicles for 10+ years (always GM) but never have I installed a relay harness or error code elim's (caps) before. I hooked up my relay harness with caps inline and couldnt get my lights to turn on. I wasnt sure if I needed to create my own ground for the relay so I connected + wire to + post on battery, and - wire on - battery post. After researching here I noticed many people took the negative from the harness and created their own ground. Could this be a reason why my lights were not working? From info I found here I understand the DDM kit (which I have) does not have to have reversed polarity. If anyone can give me a few pointers, or even one better, some install pics with a DDM Kit and harness I would be grateful as I only have my fogs loaded up at the moment. Thanks!