GMCaholic

Before he installed the 1/2” spacer he would rub at about 90% turn (give or take) after the install he rubs after like 98% turning (again give or take) im just not sure if its from the uca or the sway bar. wen i see my young brother again ill check where the rubbing is coming from Hope this helped Sent from my iPhone using Tapatalk

A few more pictures Sent from my iPhone using Tapatalk

My young brothers set up 3” level up front nothing in the rear 22” factory chevy wheels 35x12.50r22 toyo mt 1/2” wheel spacers in the front Minor trimming on front Looks pretty clean if you ask me Sent from my iPhone using Tapatalk

Im not rubbing on the UCAs just on the sway bar. "How bad?" Just enough to notice it when im doing a turn at full lock. By that point i give some slack on the wheel and proceed turning. Sent from my iPhone using Tapatalk

Yes only 3" level on stock rims with 35/12.5r20 though Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Thanks! Sent from my iPhone using Tapatalk

Yes there is rubbing in the felt when i turn and on the sway bar but, i will be trimming some of the wheel well felt today but i still expect it to rub on the sway bar at full lock. I had this same set up on my 14 sierra so i know what to expect. Hope this helps And yes only on a 3" level Sent from my iPhone using Tapatalk

Tires went on today, had to wait longer than expected but they are finally on Sent from my iPhone using Tapatalk

Got rid of my 14 sierra and got the 16 model now. 3" level went on today and tires will be on tomorrow. Here is how it sits now with stock tires (Old toy) (New toy on the left) Sent from my iPhone using Tapatalk