SilsbySilverado103

I'm confused about one part. How does the rear sit lower when the shocks don't affect the ride height in the rear. The ride height is affected by the springs and block between the axle and springs isn't it? Also, I'd be curious to see the difference from the 2.0's to the 2.5's as I have heard really good things about them.

4WD trucks are more likely to go in places where you may need to be towed out or tow others out was always my thought.

I just removed the front bumper to install mine. It takes a little bit but it's not very difficult. You just need two people to actually remove the bumper or risk dropping it.

I have that kit for sale if you're interested.

I have a 2/4 Belltech kit for sale if you're interested.

Someone correct me if I'm wrong but you'd need to rearchitect the rear end. Something like a four link.

The 3" drop comes from the 2" drop shackle and removing the block for that kit. You can see the aluminum spacers in the image which would be on the u-bolts underneath your axle for the full 3" drop.