sundj15

I didn't get a curved one but am very happy with the cheapest one on ebay I could find. My quality was actually a lot better than expected. I took the chance and I'll do it again. I will get a curved at some point. More than likely will find the best deal again then also. Sent from my iPhone using Tapatalk

I ended up taking the whole box off when I did it. Made it real easy but took a bit longer. Sent from my iPhone using Tapatalk

If you go to the totron website they sell kits that have it manually switched and through their remote. Their remote and harness and switch are plug and play. Sent from my iPhone using Tapatalk

Yeah that is correct. It comes out just to the right of the brake booster when looking at it from the front. If my memory serves me right. Sent from my iPhone using Tapatalk

That's what I did with mine. If you get down and look by the brake pedal to the left and you will find another electric box. I unhooked the harnesses and unscrewed the box and behind it is the wiring harnesses to the engine compartment. I just straightened a wire clothes hanger and put it through. It happened to come out right with the others. It's actually a lot easier than it looks. Sent from my iPhone using Tapatalk

Happy to join the club! Sent from my iPhone using Tapatalk

Yeah I got that. Maybe I worded my post a bit wrong. I meant that I have a switch that is also lit up in the cab. I was wondering what people were getting poet from to power that small light in the switch. (Not the led bar) Sent from my iPhone using Tapatalk

Question for all that have installed lights with a lit rocker switch inside the cab. What did you splice into to get the rocker switch to be lit up. The one I have has a one foot positive wire coming off meant to power the light in the switch. Would like to know if people just attached it to the constant power coming from the battery or if you found a place inside the cab to hook it into. All help is greatly appreciated. Will be putting a 32" behind the grill tomorrow night(hopefully doesn't carry over into Saturday). Thanks in advance. Also have a totron wireless controller that i would like to use instead but I've talked to them and they don't have a wiring diagram for it to use with a NON-totron wiring harness. Been in garage trying to figure out a way to get it to work with no avail. Anyone have experience with this possibly? Sent from my iPhone using Tapatalk