Syclone3MT

What kind of suspension drop do you have on this truck? I love the stance, very sharp truck!

I do have a level kit on mine and slightly larger tires. I can text you some pics if you want. Tried posting some pics but says the file is too large.

Yes they do. The H7 kit is plug and play. The driver even fits behind the dust caps. Thats another nice thing about these. Now i have to get a set of LED fogs to match the LED lights. The yellow fogs bother me with the nice white LED headlights.

$199 is steep but Im telling you, their worth every penny. The output is amazing. Their crisp, and I can honestly say I enjoy driving at night again. I did a lot of research and chose these bulbs simply because their the best. I do have them in a projector set up, so I can't vouch for the stock reflector output. Buy them and you will not be disappointed.

I know the scotch locks made me cringe. I installed a relay and wired the LED's on the winjets as day time running lamps.

You do not have to remove the Winjet headlights to adjust. You just have to remove the top shroud that covers headlights/radiator. Remove all the clips and you have access to the adjustment screw/bolts. Actually very easy. I installed the Winjets last night with GTR LED Gen 3 bulbs. Love these lights!

Savinhillspyda. What LED KIT DID YOU GO WITH? And are the low beams an H7? Want to order my leds today. Haven't got the winjet lights in mail yet.

I just bought these head lights. They should show up soon but want to get an HID or LED upgrade for these. Morimoto HID Elite for the HID kit is what i was looking at. Any suggestions for the LED that would work good with these lights...?

What bulbs do the low beams and high beams use?

New KO2 in my 14' Silverado. 2 3/4" level kit and 1" higher in rear with blocks. Love the look and drive. Cant wait for some snow to test them out. In mud there not great but what tire is when its mud packed. 275/60/20

Those cognito UCA's look like a nice setup. On their website it says they recommend there struts to go with the control arm...? I'm sure id be fine with my stock strut and spacer kit (level kit) right? Anyone else installed these on there leveled truck before? Just curious. Their proud of there UCAS, but look like a good investment. At least the ball joint is easily replaceable. Thanks for your help.

Tanner709 Thanks for the advice. I'll def look into a different lift. Don't want to compromise angles and cause wear on my truck. I don't mind spending the money, just want to do it right.

It does sound crazy. I walked to the rack and physically watched them wiggle the tire from top to bottom. The play is not terribly bad yet or dangerous as the mechanic said, but just wanted me to be aware as I just invested $1300 in tires and could potentially cause tire wear down the road as it gets worse.

I love the look of my 2.5" RC level kit. Installed about 7500 miles ago. Had factory 18" wheels on truck until yesterday. Took truck down to tire shop to get new 20" wheels and tires installed. They informed me that my upper balls joints had some play in them, Truck only has 20,000 miles and level was done at 14,000. Not very happy about that, I think my next step is to go with a different lift. The level kits just cause too much wear and tear and in my opinion do not ride very well. Would like the Bilstein struts 5100's I think..? but not sure if I can get as much lift out of it...? I love the stance of truck now and don't want it too high or any lower. Went with BF Goodrich KO2 275/60/20 on a set of Fuel Vapor Machined 20x9 rims with 24mm offset. Looks great and no rubbing.

New wheels and tires.