Criscone

Best place to get rear billstein or fox shocks? Running a 5” block. 17’ 1500 Sent from my iPhone using Tapatalk

Not the best photo, parked on a hill and dirty but for some reason I can’t seem to get a good photo of it. Loving the new setup! Sent from my iPhone using Tapatalk

Thanks! Has a few more things to make it perfect in my eyes. Suspension is a zone 4.5 with billstein 5100 struts set on 3rd setting (total lift 5.75”). Rear is 4” block now, but 5” is on the way. 305/55/20 falken at3w 20x10 -19 Hostile Sprocket Sent from my iPhone using Tapatalk

Finally got the new setup in. The rear is almost an inch lower and it’s killing me. What are my options to gain .5-1” in the rear? Add-a-leaf adds to much. So maybe a 5” block? (4” block currently) airbags? I tow a heavy boat all summer, and where it sits now is normally how it is when towing. So I’d rather not have it dragging ass towing. Sent from my iPhone using Tapatalk

Got my 5100’s in, does the factory spring perch come off and install onto the 5100’s? Sent from my iPhone using Tapatalk

5” and 6” lift guys, what is the size of your rear block? I think only RC offers a 5”, so curious to what size the block is? I know zones 6.5 is a 5” block, but nobody else seems to have info on their rear block sizes. I’ll be running around 5-5.5” lift up front, so I’m trying to find the perfect rear block that sets me a touch higher in rear since I tow a big boat. Sent from my iPhone using Tapatalk

Trim the bumpstop in half. Sent from my iPhone using Tapatalk

Didn’t even think about summit. Thanks! Sent from my iPhone using Tapatalk

Hostile wheels, with a hub of 106.1? I believe. They don’t come with rings, and yes I know I can torque properly for lug centric - but I like hub rings. Where’s the best place to get them? Sent from my iPhone using Tapatalk

I remember you did but than I see others didn’t. Was yours just at full lock? Lift comes in today but havnt made my mind up on wheels yet. Sent from my iPhone using Tapatalk

I keep hearing that stock 20” wheels will hit the stamped control arms on a knuckle lift. Mainly the zone 4.5/6.5. Has anyone really had this issue? All terrain 20” wheels. Sent from my iPhone using Tapatalk

I have a 17 Sierra with wireless charging. Obviously doesn’t charge my iPhone X. GM offers part# 84526978 - But is that everything? Will I still need the harness here? Thanks! Sent from my iPhone using Tapatalk

What offset? Looks like + something? Sent from my iPhone using Tapatalk

20x9 sprockets? Sent from my iPhone using Tapatalk

That’s perfect. I remember my 4.5 being perfect but wasn’t sure how bad the 6.5 would be. I thought about modifying the strut spacers to 5.5” so it’s a happy medium between the 2, because I only want to run a 33, not a 35. Been there done that on a 1500, no thanks! Sent from my iPhone using Tapatalk