CuzznVinny

Ive have mine on a while and like them, definitely an improvement. I've had bilstein's on other trucks. Id rate the fox adventure series and bilstein's about the same. They're roughly about the same price too.

SOLD

Used it once to tune and correct my speedo for bigger tires. Sold the truck and set it back to stock. Tuner is unmarried and ready to use. Comes as pictured. $250 Shipped, USA 48, Paypal "Friend"

Everything I've seen says 2017+, can anyone confirm it works on a 2016? I wouldn't mind adding it.

SOLD

I have the punch in the forsale section

Cool... looking forward to the update with the rears.

Thanks... so when you say better OEM like fit, I assume the fox shocks dont have the bushing bracket adapter plate at the top like the RC.

I have the same truck and lift. Care to share part numbers on the shocks. Thanks

mine came with loctite already on the bolt. The square hole needs to be a perfect 3/4" square. push it thru and the black plastic has tabs that will catch and semi hold it down. Tighten the bolt all the way down and the metal clip will spread and pull it tight. the lights have a double gasket and should not leak, I added 100% silicone around the perimeter of the hole just to be safe.

bump

Greenlee 3/4" square metal punch. Big time saver when installing the newer cab lights. Punch is brand new with the exception of the 4 holes i punched today for my lights. Should last for hundreds of holes. Measure, Punch your hole, file to deburr, and mount your light. It did what I needed it to do, and dont need it anymore, Paid $95, selling for $55 shipped, paypal ok, usa 48

I think a 20x9 +0 will be petty flush, I have the flares so I did a -18 on a 20x10. I wanted the biggest lip I could get and be pretty flush with the flares. Grill bars were removed, just screws in the back. Chrome was scuffed, primed, base coated and cleared. Chrome can be painted over just fine if done right. Everything fit in the light itself no drilling. Theres a lot of room in there. Fit the ballast and Canbus box in there no problem.

yes they do, the older RC UCAs were sealed, but the newer ones have a zerk.