Will2015
Member-
Posts
45 -
Joined
-
Last visited
Profile Information
-
Name
Will
-
Location
Houston tx
-
Drives
2015 Silverado
Will2015's Achievements
Enthusiast (2/11)
4
Reputation
-
I’d like to buy this from you where are you from?
-
Darth_Vader I've been following a lot of your work and I must say I'm very impressed and a huge fan. When you get a solution for heat and cooled oem seats I'd like to buy a set from you for my 2014 lt cc. I have tried swapping ltz seats and switches but neither worked. I'm guessing I need new harnesses maybe control modules. Thanks
-
Pgamboa could you let me know how to hard wire them?
-
Adamz71 what year is your truck
-
Checked voltage with my power probe and one wire is ground the other is not showing voltage but a signal showing 2.2
- 142 replies
-
- dl3
- power fold
-
(and 4 more)
Tagged with:
-
I haven't checked the voltage. I'll have to take the door panels apart again to do so. I used pin #3 for the puddles and #41 for the signals. Then on the mirror plug I added pin #1 & #13 and joined pin #7 ground to 11 ground. Before I tore apart the original dl3 harness I plugged it in to see what would happen and turn signals worked but puddles were dim like they are now. I figured since that harness had extra wires it would have something to do with it. I also turned locator light setting on and off and nothing happens.
- 142 replies
-
- dl3
- power fold
-
(and 4 more)
Tagged with:
-
Where did you connect your puddle lights under the dash? I unpinned a factory harness and ran everything to their stock location but my puddle lights come on very dim. You can't see that they're on. So I'm wondering if I need to run another wire to hard wire into module or maybe both puddle lights are burned out or something.
- 142 replies
-
- dl3
- power fold
-
(and 4 more)
Tagged with:
-
I did this mod but my puddle lights are really dim like to the point you can't tell they're on unless you look real close under the mirror
- 142 replies
-
- dl3
- power fold
-
(and 4 more)
Tagged with:
-
So I finally received the right switch part #23154702. Powerfold heat and has full motion. Googled for hours on end to find a pic or reference as to what wires are what and go where but didn't find any solid info to make my puddles and blinkers work. I'm pretty good with wiring and figuring out what to do but this here has me stumped and I don't want to just guess till I get it right on a $45k truck. The info above makes sense to me and is what I want to do but again can't find even a diagram for pins or wire colors
-
The upfitter pdf I found has 259 pages and doesn't have anything on mirrors
-
That clear a lot up for me thanks. I have to order the switch since the one I had is the wrong part since it came from an Ltz with memory functions.
-
Anyone have switch number 23154702 for sale? Seems to have been discontinued and dealer will not tell me what replaced it without using a vin number
-
Where did you find what the connectors look like and what their pin numbers are? Also did you have to run two wires through both doors from mirrors directly to under dash modules?
-
Anyway you could show pics with the connections you made? I'm more of a visual guy. I've read this multiple times but am still confused.
-
Fstaslp how much are you asking for the mirrors?
-
Forum Statistics
246k
Total Topics2.6m
Total Posts -
Member Statistics
-
Who's Online 22 Members, 1 Anonymous, 1,454 Guests (See full list)