Trinity2020

I recently added a pair of Fuel "Diesel" Wheels and Mickey Thompson 35x12.5x20 ATZ's to mine. 1.5" level I did about a year ago.

I went with the 1.5 keys and 1.5 blocks from Rough country and inhave no complaints at all. Level all the way around. I will probably add bags to the back later to help with trailer hauling but that's about it.

I did the Rough country 1.5 leveling keys and 1.5 blocks in the back. We adjust torsion bars a little guarantee the front was dead even with the back. Love it so far. Time to find some wheels and 35s.

I ordered the one you got as well. Has anyone swap the high beam and fog lights over? Which bulbs did you use?

I got my 2020 diesel HD new in September and have loved it ever since except for some issues with the radio/backup camera. I've tinted the front windows to 20%, added the smoked vent visors and hood protector, gator tonneau cover, chevy full coverage floor mats front and back, 1.5" Rough country lift/level front and back and the black and white American flag lettering on the tailgate.

These are 33" tall on the truck and my stock ones were 31" tall.

Been a while since I've posted any pics. But how j finally got myself a set of wheels and tires commensurate with the 3.5" RC suspension lift. 20x9 0 offset XD 828's with Nitto Ridge Grapplers 265/60/20. I got the set for $1200 with about 6k miles on them.

Well i got my rough country 3.5" installed this weekend. I added the spacer on top of the strut up front and the upper control arms that came with the kit, and then added the block and rough country shocks in the back. I didnt use the little 1/2" spacer that goes under the springs up front because i didnt feel that 1/2" was worth the effort of dissassembling the entire strut. This pic is on level ground with only the front spacer/control arm done. here the front was 1 1/4" higher than the rear. this is one on unlevel ground(front is downhill from the rear) with the front done, and the reat blocks and shocks just before i got the alignment done. Anyone ever had an issue with the one side of the truck being like an inch higher than the other after installing a lift? My right side is 1 full inch higher on the right side than it is on the left. The rought country tech rep guy has no idea what would cause that and apparently has never heard of it.

Awesome thank you

How are the angles on the ball joints up front?

How are the angle of the upper ball joints with the 2.5" RC lift? Any need to get the RC UCA's and swap them out same time or are the stock ones just fine with the RC 2.5 level? I've seen enough people running 20x9 or 20x10 aftermarket wheels with 33x12.5x20 tire which is what I'm leaning towards so it sound like the RC 2.5 or their 3.5 kit is the route I'm going.

I listen to the radio and use maps in mine. Just start the radio and then go into android auto and it works just fine. Ive had mine for a couple weeks now and I love it. I havent had any of the issues others seem to be having, whether it be the install process or my Galaxy S6, everything has worked great so far. I love it.

Havent really decided yet on who has the best deals. Also trying to decide on how aggressive a tread I want considering it will see more road time than trail, but I dont want stock tire highway tread.

Beautiful Truck I was thinking of the 20x9 962's on mine with a 2.5" level with some 33x12.5x20's.