cbrsilv15

Marketplace score. All brand new parts with zero miles. Taken off at the dealership to put the 6 piston kit on.

No pics, but I finally did the 19+ 4 piston caliper and rotor swap. If you guys haven’t bled your brakes in a while, I recommend it. Both the rear caliper bleeders were seized. One stripped, and one snapped in half. My ez-out broke off in that too, resulting in the purchase of a new rear caliper. .

Yes. The 19+ calipers fit with the larger rotors. You just have to shim the caliper to center it over the rotor. I’m actually doing this swap on Saturday morning. Check marketplace for the calipers. I scored some new take offs from an Escalade because they upgraded to the brembos right on the lot. 2019+ are 4 piston, while the brembos are 6 piston. I got brand new loaded calipers front and rear, the front rotors and the dust shields for $170. You can’t beat that for a 4 piston big brake kit!!

Those are just the DL8 mirrors. Just letting you know, you’d be super lucky to get $75 out of those. I’ve been trying to sell mine for years now with zero hits.

They’re not sold separately like that. You’ll have to get the whole assembly.

If anyone is curious about doing this, check out rock auto for the prices. Super cheap for OEM parts too. I’ve been thinking about doing this.

https://www.whiteautoandmedia.com

Check out the other pages, and you can see what the problem is. There are far too many horror stories with them than good ones.

I got my bow tie installed finally with the help of my little guy. I bought it used, and it didn’t have the harness. I made my own with some waterproof connectors in case I have to remove it.

I picked it up used on the marketplace. I’ll make it work here shortly. Not bad for about $100.

Yesterday I purchased an illuminated bowtie, but it didn’t have the harness with it. Working on that issue now. Rotated my tires finally and gave it a quick rinse, because I know it’s supposed to rain for the next 3 days here.

After years of detailing everyone else’s vehicles, I was able to share some love with mine. Finally was able to do a single step correction and ceramic coating I used the cquartz UK and topped it with Reload.

Does anyone know for sure the differences on the front bow ties for Chevy trucks? I’m specifically looking to see if they physically fit the same insert on the grill and the tabs on the back are shaped differently, or if the whole bow tie is larger on one and won’t fit. I found a good deal on a illuminated bow tie but it’s for a 17-19 1500. I know the HD bow ties fit the 14/15’s, but not sure what exactly is different.

https://www.whiteautoandmedia.com/product-category/fullsizetruck/k2/ Check out WAMS. You can choose to source new hardware that matches the compatible part numbers, or you can purchase brand new OEM modules from him as well with a full oem warranty. This is the o LT place I would trust for programming. Sent from my iPhone using Tapatalk