16silvdriver

What tire pressure are you running? I got the Nitto Ridge Grappler 285/65/r18 on a 2.25" Level 2016 crew cab short bed silverado ltz and the tire shop filled them up to 35 psi which is what the door said for my stock 285/45/r22 bridgestone duelers. After looking up the load index for those wheels an pressure i got 2337 on the load index and ran it against the chart for the Nittos and did the math out that for my truck i should be running 42.6 psi cold. Had to look up some stuff about how to read the charts so i figured i'd throw this up on here to save somebody the trouble. Everyone has different preferences but for now ill see how they wear with 42 as the baseline. Also, might want to zip tie that wheel well lining back a little bit in case when the PSI warms the tire up and it builds pressure 2-3 psi. Looks sharp tho.

Also have adjustable pedals but if you watch the video that was previously posted, explaining the mod, I don't believe it matters if you have adjustable pedals or not.

If I'm trying to run 285/65's or 33x12.5 on 18s what offset could I run? Would I run into problems with a 0 or +1? been looking into +18 mostly so far. Running a '16 1500 with ReadyLIFT 2.25 level. Thanks!

I have a 2.25 Ready Lift that was installed by the dealer, has anyone experienced a slight shake or rumble around 60-65? I brought it into the dealer and the answer they gave me was that the blocks make the steering lighter and it causes wandering leading to the rumble. Their solution was to rotate the tires. Anybody have input on this?

Never had spacers because what ive heard about lug nut stress, but if it doesnt really change all that much i might look into it because of the stance. Probably just gonna buy new rims with less offset if i wanted to achieve that look though

Ready Lift 2.25 that i got in this week. Night and Day difference.

Anybody fit a 295/60r20 with a level? Was thinking its a close fit with a +20 offset

With a +20 you should clear i think

Trying to put fuel assault 18x9 +1 with toyo open country AT2 33x12.5r18 with 2.25 level, from what ive seen i think these will fit with MAYBE rub in reverse at full lock

what wheel and tire sizes? looking to do the same

what kind of wheel tire combo are you running

Called up the dealer and the first guy i talked to for a ready lift 2.25 level and alignment wanted 1200 dollars..... absolutely absurd. So then I had a friend who owns a body shop call the same dealer (parts guy instead of service guy) and they told him 475. I know everyone knows how dealers mark up everything but by upwards of 700 dollars?! Thats just wrong.

Anybody running the stock 22's with a level wrapped with 285/55/22? I want to try to run this and am anticipating a little carpet rub solved by pulling it back but not sure. Pictured is are wheels with 285/40/22 no lift yet

Only rub on full lock? I have same wheels and a 2016 and was looking to do the same setup. With the 3in level are u chin up or straight level? Was gonna do a 2.5 and i was worried the 285/55r22 wouldnt clear.