Jason Culbertson

Using the factory wires requires reprograming the truck at a dealer. It's also hooked into your normal light control so it didn't sound like there was an additional switch. I ran wires myself and hooked it up through an accessory post in an unused junction box.

http://www.ebay.com/itm/4D-44inch-480W-Cree-LED-Light-Bar-Spot-Flood-Combo-Offroad-4X4-Car-45-PK-Osram-/351761793723?hash=item51e6a302bb:g:PpcAAOSw9VZXOrTj&vxp=mtr Looks like this one

Picked mine up off of amazon for $90, can't remember the exact size 40" to 44", but it's 540W and 48000 lumen. The included wiring kit wasn't long enough so I had to rig up my own. Unfortunately I can't upload a pic as the file size is to large.

He didn't buthink my assumption is that they could enable it

Yes didn't get the factory off road lights. They're a grand for those 2 small lights. The bar is part of the package and yes the third brake light in the bar works, however the third brake light on the cab is disabled because of the bar. It does still illuminate when you turn the box lights on. Talked with a tech, the wiring runs through the ecu so it's possible to do but certain pins need to be moved around and then the truck would need to be tree programmed to accept those pins.

Planning on using the factory wiring, I can trace it to the relay and battery, just cant figure out where it goes from the relay to the cab??? Hoping someone may know.

Anyone successfully used the factory wiring yet?

Looking to put an aftermarket Led Light Bar on the roll bar of my 2016 All Terrain X. Has anyone attempted this yet? I noticed the roll bar is wired from the factory for the GM accessory off road lights. Looking to see if anyone knows what fuse I should tap into and what wire for the fuse, assuming its already wired to a relay. Thoughts??

Has there been an official resolution to this? My 14 sierra is doing the same thing at slow speeds. Not the DI issue but the clicking issue. My GM Dealership has had my truck for 2 weeks and hasn't been able to pinpoint the problem. They've replaced a few parts but nothing seems to change the clicking noise. Getting frustrated quickly.