LoneStar87

Why don’t you just remove it if you don’t like it? I put a brush guard on my truck about 4 years ago and all the brackets and hardware is roached out. Thinking of removing mine.

Dealer scrapped the “excessive” rust off my rotors and greased all the proper fittings. As of now there’s no noise. I’m no mechanic but YouTube is a beautiful thing. I’ve watched a ton of videos on brakes and replacing different components. I think if the noise decides to return that I’m going to replace everything myself. I’ve heard good things about Wagner rotors and brakes. Maybe I’ll give them a go. Glad to hear your problem is solved

Have a '14 Silverado Crew Cab. For the last couple years, my brakes have seemed to be squeaking at low speeds (5-10mph). So I figured it needed new brake pads and rotors. Took it to the dealer a couple times. The first time they resurfaced the rotors claiming that they were still good but had small amounts of rust on the edges. Seemed to have solved the issue, then a few months later the noise returned. Took it back to dealership and they greasing some parts and checked the pads. Same thing, solved the problem but it eventually returned. The dealers says, well since everything is cheaply made, the pads and rotors don't last as long as they used to. And because of the NE climate you're going to have moisture and moisture can lead to rust causing the squeaking noise. So I replaced the pads and rotors. Noise went away and sure enough it's back. I'm ready to shit can this truck already and say screw it. Nobody seems to know or can fix this issue. I have seen other posts here about the break peddle and maybe that being the underlying issue. Any body have any thoughts on this??

2014 SILVERADO

2014 Silverado Aries Brush Guard Nitto Terra Grappler G2 XD Monster 2

Thanks for the info. I'll be sure to post pics after I get my set up

I'm sure this has been asked already. But what exactly is the offset? I've heard +-12, 18, +-24. Not sure what all that means. I have a stock 2014 Silverado Crew Cab. I want to get BF Goodrich KO2 and KMC Monster wheels put on. I'm contemplating getting a leveling kit or lift. And do I really need one..? Also, I looked at Tire Rack and it says the offset of the wheels I want is 18mm, is that just typical or do I have to add something when I put them on my truck. A lot of questions but feedback is much appreciated. By the way, GO STEELERS!

Another pic

Sorry. Forgot to add photos

14 Silverado. Added: Tonneau cover and bed liner Magnum RT steps Aries brush guard Window tint Black bow ties Future Additions: Off road tires. With lift CB radio Also removed front air dam and rediculous mud flaps on rear of truck.