kdecaire

Sent from my iPhone using Tapatalk

Pulled everything out ! Makes it's much easier and you get a better finish .. I sorta explained what I did in early posts of this thread

I did all of it myself

I love the sport bar ! Mine came with lights on it and I really haven't found and issues with hauling stuff around yet, makes it slightly tighter for stuff but I made a tonneau cover with it so I still have full functionality imo

Yeah ! Once it's wrapped around the edge it sticks well ! I took every piece completely out of the truck inside my home and did them I have a couple small ripples but I could have took a little more time doing it and I used a hairdryer .. a heat gun would have helped

Around the radio was the hardest piece because it was so big and I dug deep to get the small piece around the radio controls. The steering wheel I had to take the airbag out to remove the pieces but wasn't too bad just disconnect the battery and take you're time read online how to remove stuff... and use a heat gun or a hairdryer to pull it around the pieces.. hairdryer takes a bit longer to really heat the wrap up You can probly buy the stuff at Walmart I've seen it there before in 24x60 sheets... I'm in Canada so I got mine at Canadian tire

Loved the idea on this thread so I did my own ! Took me about an hour to do all of it

Thanks !! And it looks better with the lights on it I've seen sports bars without the spot lights Also I spent the time putting red LEDS in the word Sierra so it lights up at night

Sent from my iPhone using Tapatalk