Jump to content




Coby7

Member Since 04 Oct 2016
Offline Last Active Today, 05:41 PM
-----

Topics I've Started

Fog lights on with low beams

11 November 2016 - 07:49 AM

Have any of you guys done or tried this?  Anytime DRLs or low beams would be on so would the fog lights.  

I was wondering if adding diodes between H4 and K2 to C2 ( Cathode at C2 of course ) of connector 4 of the underhood fuse block would accomplish this.Screenshot%202016-11-11%2008.31.32_zpsuv


Half fender trim

09 October 2016 - 11:51 AM

Yesterday I saw a nice white Chevy truck beside me with half fender trim that would fit my 2011.  Front started from the front bumper and went to the top of his GM mud flaps. They were chrome inlaid into black plastic, on a white truck, they looked pretty good.  Couldn't stop the guy to ask him where he got these. Rear were the same started from the top of OEM mud flap to an even height on the front of the fender.  If anybody has these or knows the company or part number I would really appreciate it. My truck is silver and I think it would look just as good on mine as it did on this white truck.


How-to renew the panel around the driver's door switches.

05 October 2016 - 03:07 PM

Today I got tired of looking at the scratches, wear marks around the driver's door switches and decided to paint the panel.  
 
Just in case somebody on here has this same problem, here's a step by step. Otherwise just skip to the last picture for end results.
 
First to remove the door handle...
 
2016-10-04%2015.17.40_zpsqqobnd2i.jpg
 
Then the two 10mm screws...
 
2016-10-04%2015.18.18_zpsyxcu6em4.jpg
 
Exposing the scratches even better...
 
2016-10-04%2015.20.20_zpshjyberyz.jpg
 
Then pulling the panel out back to front...
 
2016-10-04%2015.20.47_zpsvfkizhaz.jpg
 
Then removing the switch assembly by removing 3 torx screws T15 1.5mm...
 
2016-10-04%2015.26.21_zpsfvyrvj7y.jpg
 
Then masking sanding to remove all shine and painting...
 
2016-10-04%2015.34.31_zpsbehnl0x7.jpg
 
Wait for paint to dry then 2 coats of clear coat and re-assemble...
 
2016-10-04%2016.08.08_zpsk0i2exaw.jpg
 
2016-10-04%2016.15.14_zpsatlwhluo.jpg
 
But I'm feeling much better now!!!
 
2016-10-04%2016.22.59_zpsxpb6dwjg.jpg