Jump to content

laketboy

Member
  • Posts

    29
  • Joined

  • Last visited

Profile Information

  • Name
    Keith
  • Location
    Carrollton, Texas
  • Gender
    Male
  • Interests
    Trucks, Boats, Bikes (motorcycles), BBQ, Babes
  • Drives
    2016 Silverado LS 5.3L Double Cab Tungsten Metallic

Recent Profile Visitors

1,488 profile views

laketboy's Achievements

Enthusiast

Enthusiast (2/11)

16

Reputation

  1. Valvoline Advanced Synthetic SAE 0W-20 Full Synthetic at about 300 miles. Will likely go with Mobile 1 0W-20, but may consider 5W-30. We rarely wee temps below freezing. I'm in Texas and like many warm climate guys think the 0W-20 is mainly for fuel economy AND helps with cold weather starts. Used only Mobile 1 in the 02 Vette Z06 and 09 Harley SG. I'm also with the guys who prefer to change their own oil and stay away from dealerships. 1) At 5000k changes, I won't change more that about once a year. 2) I don't like my cars, motorcycles or boats in others hands if I can do it myself, even if "free", shit happens. 3) The time I save doing it myself vs round-trip drive to the dealership and the wait pays for the cost of oil and filter - my time is very expensive!
  2. Agreed! Reminder these are on 20x9 with +18 offset. Continue to be impressed with how great these ride and how quiet they are.
  3. Here you go. Sorry pics are a little dark. They hardly stick out and are almost flush. Maybe 1/2-3/4" max. I don't like the look with tires much outside the wheel wells until you go with 6"+ lift and and the 36-37" or larger tires, then some still get them out there and they don't look great IMO...
  4. BTW, You're Tungsten Metallic looks even more BLACK than my 2016! Love this color!
  5. Yes Big Red (BTW, have some great family in OK!), that is correct on wheel offset: MotoMetal 970 20x9 +18. All I can say is that this setup has absolutely NO rubbing after a little over 1000 miles. I know there is very marginal differences between diameter and width of 2 brands of the same tire size, but I can't imagine there would be significant difference between +15 and +18, that's 3mm or .12". I'm very impressed with the ride and look of the Nitto's. They have a lot of great reviews + a 65K mileage wear warranty. Not a single regret!
  6. Same here on the mpg hit after going to Nitto Grappler G2 305/55-20's 33.5x12" tires. Hope to get 1-2 mpg back after a DiabLew tune. No complaints here either. Love truck and look.
  7. Nice looking truck. We purchased within a week of each other, although mine is the poorer cousin LS Double Cab. I had a 93 Silverado Ext Cab about the same color and loved it. About to go data logging in next few days and send files to Lew.
  8. So, you've run the Bilstein 5100's on your truck? While anyone can spend time Googl'ing and find (like any other subject) that there are certainly differing views on the 5100 with respect to "better", "more firm", "harsh", etc. IMO, the ride quality is MUCH improved over the marshmallow stock suspension. Seems around Dallas, roads are always under construction and there is a lot of uneven bumpy terrain. Like many, I did not like the way the truck handled with the soft stock shocks. One of the first things I've always done on new vehicles (definitely trucks) is wheels and tires and new shocks on trucks. OEM shocks on most standard cars and trucks is one place manufacturers skimp. Larger wheels and tires magnify the OEM shock shortcomings. From what I've read (and I spent a lot of time reading both facts and opinions on leveling options and these shocks), most who install the 5100's like the more firm ride they provide as opposed to the mushy soft ride of the stock shocks. Facts also seem to agree (as you will concede) that they are much safer on front suspension components than other lift or leveling options. Lastly and subjectively, I agree that they are more FIRM (a very good thing IMO). As many others agree, the are NOT HARSH. It's humorous to me how much keyboard action has been spent over recent years on the Bilstein 5100. One thing that tickles me are all the xspurts debating whether the 5100 uses additional preload over OEM stock (which are also preloaded). Yes, they increase preload with perch settings over stock. Straight from Bilstein: "The lift on the 5100 Series leveling shocks is achieved by increasing the preload on the factory coil. By adding more preload, the shock is designed with more rebound damping as compared to the O.E. or standard aftermarket replacement shock.... with the perfect damping rates, optimizing your ride and handling characteristics." Again, have you run the 5100's? If not, is your truck leveled and if so, what option did you go with?
  9. Bilstein 5100 at max height adjust will provide 1.85 (close 'nuf to 2") and give you much better ride that stock shocks. No premature front suspension wear like some say the level kits can cause. Little more expensive (I paid $200 for front pair on Amazon), but much better option iMO. Search forum for rave reviews here, there a topic all about the Bilstein 5100's.
  10. Oh yes, and the inside the rail install on this style cover that doesn't prevent using the stake pockets. Downside: No real security if someone has a knife. Of course, IMO, like your home - if someone wants in, they are GOING to get into almost any cover with a crowbar...
  11. After reading a lot of posts here and elsewhere and narrowing choices down to function and budget for my first bed cover (I've owned a truck for the last 35-40 years), I decided on the Access Vanish to start with, figuring if I didn't like it I could sell it easily on craigslist here in Dallas metroplex area. The Vanish seems to have very good reviews overall everywhere, suits my needs and I liked the very low profile and ease of roll up to be able to use entire bed without removal. Install was very easy except for the 4 front/middle clamps on each side (rear clamp was easier). They were a little finicky IMO to keep straight and aligned. Use of a spring clamp would have helped but I did without and finally got them on securely and rails aligned. The rest was cake. I'm really happy with the quality for price, fit and finish. I put a good coat of Protect-All, a great product I've used for years on vinyl motorcycle seats and other vinyl products. BTW, best price I found was eBay seller Thoroughbred Trucks. Great folks, fast shipping. MSRP is over $400, many internet sellers about $300. I paid $270 shipped.
  • Forum Statistics

    245.8k
    Total Topics
    2.6m
    Total Posts
  • Member Statistics

    333,234
    Total Members
    8,960
    Most Online
    Donald Dolan
    Newest Member
    Donald Dolan
    Joined
  • Who's Online   3 Members, 0 Anonymous, 728 Guests (See full list)

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.