JUSTINASS

thought i would update to help others out.... i got the murry condenser and replaced it myself... i think it was around $60.00 i also bought the bracket from amazon...$8 my line looked perfect and didn't show any signs of leaking so i didn't replace it. after replacing the condenser i took it to a local a/c shop i trust and had them pull a vacuum and recharge it...they charged me $100. overall pretty simple install minus a few bolts that are hard to get to on the underside of the radiator support. sucks knowing that this is pretty much a defective part from the factory and i had to waste a sunday afternoon fixing it...but i do have 92K trouble free miles, so i can't complain too much. great video i followed and helped out with what to remove...

thought i would update to help others out.... i got the murry condenser and replaced it myself... i think it was around $60.00 i also bought the bracket from amazon...$8 my line looked perfect and didn't show any signs of leaking so i didn't replace it. after replacing the condenser i took it to a local a/c shop i trust and had them pull a vacuum and recharge it...they charged me $100. overall pretty simple install minus a few bolts that are hard to get to on the underside of the radiator support. sucks knowing that this is pretty much a defective part from the factory and i had to waste a sunday afternoon fixing it...but i do have 92K trouble free miles, so i can't complain too much.

yeah and i ordered the hose off of amazon and the bracket...got a condenser from autozone... are you saying there is a better modified line available? can you expand on this info?

well my A/C went out yesterday...thoughts?? I don't think it is compressor... anyone replaced theirs themselves? thinking it is the condenser...from my research. im not seeing signs of leaking on the line itself...just the condenser... i do not have the bracket on the line either. 2014 94k miles

anyone replaced theirs themselves? thinking it is the condenser...from my research. im not seeing signs on the line itself...just the condenser... i do not have the bracket on the line either.

do ya'll have part numbers of the part that is affected? is it the lines that crack? or the condenser? so i found the part number to the hose and bracket need to help relieve stress on the 90 degree elbow... however - im confused as to weather it could also be a leak at the condenser also? it is either or? Im trying to buy the parts and install my self and then just have it recharged...

mine went out last night on our way to valentines dinner...78 degrees outside and humid...wife was not happy camper.

Thanks you sir

Just my opinion but that amount is too high for a level...I would go with a full suspension lift...control arms / shocks / sway bar etc... what is you goal? Larger tires? What size?

Thanks...my first choice was silver...im a fan...but this red popped up locally and got a good deal on it. i did in fact get 70K miles out of those Toyo MT...however they were miserable to drive on the last 10K miles...loud... Tell me about your Bilstein 5100 with 2.5 Level...how did you install yours? lowest setting and kept the level installed??

AFTER: 94k miles 285-65-20 BF Ko2'S... brake pads shocks this next weekend.

spent way too much money on tires lol before: installed @24K miles 2.5 RC level 33x12.5x20 toyo open country MT

after - 285/65/20 bf KO2... they definitively sit taller but i cant seem to see / feel them rubbing...

before- 2.5" rough country 33x12.5x20 toyo open country MT...they did rub the swaybar at full turning lock. got right at 70K miles out of those tires. the last 10K miles were miserable however - ruff ride...

also the panels have bowed from loosing their seal and actually hold water at each section... i will take pics and upload them. I actually tried to put it back together with caulk and screws lol....