Jump to content

jsk

Member
  • Posts

    15
  • Joined

  • Last visited

Profile Information

  • Location
    tennessee

jsk's Achievements

Enthusiast

Enthusiast (2/11)

0

Reputation

  1. Was the binding and sagging the leafs and shackle and could they be loosened,then bounce or cycle the suspension and then tighten back up with the weight back on the springs to get truck leveled(or close) ? Or did the sagging require new leafs?
  2. Thank you. Read through the link. A lot of the replies talked about fixing truck yourself with homemade spacers to mask what is really causing the truck to lean. My truck is outside the GM specs and just trying to find someone with the same problem and what was the cause and how did GM fix the leaning problem. Possible leaf springs out of spec, possible body mount? Very curious to find answers before taking truck back to dealer as this problem was not listed in current service or technical bulletins.
  3. 2018 rcsb z71 also has bad lean . Passenger side rear way high and also very noticeable. Anyone had rear leafs changed out under warranty’ to FIX this?
  4. DBR Performance in Spring Hill Tn. Check out their Facebook page and their website. Great people to do business with. Great tuning also with in house dyno. Well worth the short drive from Tullahoma.
  5. I have been running 305-50-20 Michelin defender ltx with no rubbing,stock height. 12.4 section width,32 inches tall. The specs for stock size Michelin 275-55-20 is 11.2 section width,31.9 inches tall. Also running stock wheels.
  6. thank you for your reply.I should have worded the question better.I know the cat back Borla does not have the flapper valve.That is the reason I am interested in that system.I have read earlier posts of people using 2013 or earlier borla catback systems on 2014 models.Also know gm/borla uses the flap valve.Question!!!,Can or will a 2013 Borla catback fit on a 2014 without any mods.This is for a reg cab only.thanks
  7. After reading the posts,does anyone know if a 2013 system(cat back) will work on a 2014?reg cab? Some of the posts suggest that they have used earlier model Borlla/gm exhausts on the 2014 trucks.i would be interested in a 2013 exhaust from Borla on a 2014 reg cab if it would fit without the AFM flap.Any info would be of great help.Thanks
  8. Anyone have a photo of the GM/Borla exhaust that are split rear exit on their truck?Also a sound clip would also be helpful.Called Borla and they said this is the touring version.I have a sport version on my 2008 and really like the sound.Just wondering if this 2014 system will be loud enough on a 2014 reg cab.Thanks
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.