a_guerrajr

don't do DJM unless you are going 4" go with 2" spindle or 2" MCG coil relocator or even 2" struts, and last option 2" coil you shouldnt need the assist bags. get the MCG flip w/ hangers and set them to 4" drop

yea what is this SNOW you speak of.? lol we dont worry about it here in Houston. Well this year it has snowed 3 times so far. 2-4 inches in some places. That's why i put on 33"s and leveled my truck! JUST KIDDING

MCG's drop spindles were not designed properly for the 2007+ Trucks, they had various complaints and balljoint issues. They just now redesigned it to properly fit. The best ones are the Ground Force spindles, they were done right from the get go and come powdercoated black so they don't look nasty and rusty after a while. Placed in recommended order by Brand Front: 2" Coils - Ground Force, Belltech, MCG 2" Adjustable Struts - Belltech 2" Coil Relocation - MCG 2", 3" , 4" Control Arms - DJM 2" Spindle - Ground Force, Belltech, MCG Rear: 2", 3" Shackles - Ground Force, Belltech, MCG, DJM (The 3" option is achieved by removing the factory block) 4", 5" Leaf Springs - Ground Force, MCG 7" Flip Kit - MCG, Belltech, DJM Shocks: MCG(New Design, requires shock extender), Belltech, Monroe Air Shocks Anything after 7" in rear requires a C-Notch Here was mine at 4/7 Ground Force up front and MCG/Monroe Air Shocks in rear.

Ok, I just want to clarify, I noticed my fog lights aren't aimed properly, one is fine and the other is off. I was down there a while back putting in HID lights, then I ended up going back to just bulbs. I'm curious if there is something to adjust them, that I might of moved or if the bulb is actually crooked This is on a 08, with stock fog light setup. Thanks!!!