scagle777

I’m gonna remove the 3” rear block and go with a smaller block. What afrermaket blocks should I use to level the rear?

This is what I have currently. It’s a 1 inch strut spacer with a 3 inch block in the rear. I guess I shouldve checked the rear before I posted.

Also what I meant was that I wanted to remove the existing kit and replace it with a taller kit

Thanks. I’ll take a look when I get home. Currently I’m sitting 38.5” in the front and 40.5ish in the rear

I have a ‘14 4wd that I bought about a month ago. It appears to already have a leveling kit but there’s still a 2” difference with the front and rear. I’m wanting the truck to sit dead level. What size do I need for that? 2.25 or 2.5? Thanks

My 2014 Z71 CC currently has strut spacer leveling kit. I’m not sure what size as it was on the truck when I bought it. I’m still about 1.75” shy from being level. Are there any huge drawbacks to running strut spacers and shock spacers together?

I’ll definitely check it when I get off work. This is the first time I’ve dealt with the ecotec engine as well as 0w-20 oil. Thanks for the info

I usually check my oil on a pretty regular basis. I just bought a 2014 with 32000 miles. I drove it approximately 15 minutes this morning, and decided to check the oil. After I let the truck sit about 45 minutes, I checked the oil and it was a bit low. The engine temp was around 170 degrees at the time I pulled the dipstick. Could the oil still be draining into the oil pan? Also, how low does the oil need to be before it throws a light? Thanks.