Jump to content

montyss

Member
  • Posts

    341
  • Joined

  • Last visited

  • Days Won

    2

montyss last won the day on September 1 2012

montyss had the most liked content!

Profile Information

  • Location
    Southern Ontario
  • Gender
    Male
  • Drives
    2009 Sierra Reg cab

Recent Profile Visitors

8,252 profile views

montyss's Achievements

Enthusiast

Enthusiast (5/11)

43

Reputation

2

Community Answers

  1. Wondering why they used the chrome running boards on it when the mirror caps and upper mouldings by the glass are black ? The Black boards are available from GM
  2. I'm not sure of the brand of clear film they use but I do know its not 3 M . Yes the color of the truck is Great I was sucked into it by the color when I first saw it , then with the colored bumpers and black mouldings it really makes it sharp
  3. Have a new 2018 sitting in the driveway Its a CCSB in Dark Slate met , has Nav , Sunroof , SLE Preferred pkg , 20" wheels , 8 speed , 5.3 L . Only changes I may make are either Matte Black or Carbon Fibre film on the chrome running boards and clear film on some parts of the front end . After 9 years the old truck had 100,000 kilometers on it and was still in perfect shape http:// http://
  4. If its the gear that's broke on the power fold you need to change the mirror
  5. they just have to adjust the tie rod ends to straighten the steering wheel , from looking at the first picture about 1/4 of a turn on each of the tie rods should do it , both have to be turned a equal amount to keep the toe in the same . they should be doing this when they do the alignment
  6. I just changed the brake light switch on a friends truck and that fixed it up
  7. We use a protector that clamps on the battery and stops the spikes and surges when we weld , its called a Anti Zap Surge protector . One clamp on the positive and one on the neg and that's it , green light comes on and tells you your ready to weld http://www.goodallmfg.com/antizap/surge-protectors/
  8. should be in the cab corner by the back seat drivers side , mid way up the post
  9. this is a cheap relearn tool that works great, I have the next model up its a ATEQ-VT10 http://www.ebay.com/itm/ATEQ-VT5-TPMS-RESET-TOOL-SCANNER-PROGRAMMING-RELEARN-ACTIVATION-like-Kent-Moore-/251371462273?pt=Motors_Car_Truck_Parts_Accessories&hash=item3a86e81e81&vxp=mtr
  10. there should be a snap ring holding down , remember don't let the centre of the clock spring turn. undo the wires and it should slide right up
  11. might be bolts # 34 or where it pivots at # 35
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.