Search the Community

The truck drives fine. It accelerates fine and everything, except there has been a humming noise coming from the rear when I accelerate recently. It gets louder the faster I go. The dealer seemed to not know what it was a first and gave me different possible issues. Now they’re telling me I need a rear differential replacement. I do have larger wheels and tires (35s) on a 6 in lift. Have any of you experienced something similar?

Just actually stumbled across this page while browsing coloradofans. Jeff from Dallas Texas, 2018 Colorado 4x4 LT, basically Stock as it's my daily. Also have a 2018 Camaro ZL1. I need some help, before I start looking at all of your trucks, mods, other cool stuff.. (copied this from coloradofans.com, also from a few subs on reddit..) Hi all, need some advice- Let me preface this with, I am not trying to get anyone in trouble nor an I trying to throw anyone under the bus. I just want my Colorado fixed. I appreciate anyones feedback as I explain the story. 2018 Colorado LT, 4x4, 30k miles.... About three weeks ago, I had an appointment at my local Chevrolet dealer, which is a very large dealer in the Dallas/Fort-Worth metroplex. The truck has a very weird sounding, only can be described as an intermittent, yet ANNOYING and LOUD squeaking/rubbing sound coming from what sounds like the front of the truck. I showed up to my appointment, and the service advisor and I went for a ride, and he said that he could barely hear the sound, but I was able to hear it as clear as day. He also pointed out that he heard it when we accelerated, and when we braked. Nothing when we were coasting, not using the brakes, etc. He told me that I would have to leave it with him for a few days, or get there early on a Saturday for his guys to take it in. I didn't have the ability to do that at the time, so I told him I would reach back out in about a week or so. Fast forward a week - I was to be traveling so I was going to leave the truck prior to leaving the DFW airport. I ran some errands in the morning, and after getting the truck up to operating temperature, It is not making the sound, at all. Unfortunately I did not have the time to deal with this at the time so I went back to my house, and hopped a ride to the airport. Once I got back, and started my routine I noticed that the noise is still back and I can still hear it as loud as day. I made an appointment for 8:15 AM on last Tuesday. I showed up at 7:30 and they got me checked in. We took it for a ride around the lot, and the service advisor heard the noise. He got me right in. the shuttle took me to work. About three hours later he called me and he said - and please bear with me, I am no mechanic and my terminology may be off - "There was a seal in the transfer casing that was rotted..we fixed it, blah blah..and now it is not making the noise, OH, and you need an oil change. Want that while you're here?". Hopped an uber back to the dealer on my lunch and drove back to the office. Everything seemed fine. I got out of work around 5pm that day and went to the grocery store, sure enough, the noise is still there, and louder than ever. I am getting frustrated at this point. I reviewed the work order only to find out that it mentions nothing about fixing anything, only that the tech could not duplicate the issue I described. At this point, I am very hesitant to go back to that dealership, so I reach out to some other local enthusiasts for a referral, and I make contact with someone who works at a dealership about 30minutes south of where I live. I was to stop by Saturday morning, and ask for his buddy the service advisor. No problem at all. I stopped in right on time, met with the advisor, we took it for a ride around the lot. Sure enough, there it is! The noise on the stop, and on the go! He heard it, I heard it. But he told me that they won't get to it until Monday because the suspension, front end guys, etc, won't be in. I say OK, Whatever it takes. I also say, hey since I am new to town and need my registration switched, can you guys please do a safety inspection? He says yeah no problem. Another $35 uber back to my apartment. Today I get a call. And now, I am being told that the noise I am hearing is the noise of air going into the engine, and it's louder because I have a K&N Blackwing Cold Air Intake system. Which makes absolutely zero sense, since the noise only happens on the stop and go, and it's also a grinding/rubbing/squeaking noise. However, at this point.. I am not arguing. Because I have a short temper and I really don't want to be mean right now. You catch more bees with honey than vinegar. I just picked it up, and it's still making the same noise. The intake is not causing the issue.. and I don't have the stock one as I just moved here. I'm not a mechanic, but that's the stupidest **** I've ever heard. I have had intakes on all of my cars. There's one on my 2018 ZL1 camaro, no noises like that. I had them on my 2016 SS, 2015 C7, etc.. Never had any issues. The only COMMON issue here is that much like in the past like I've dealt with Pontiac back in 2009, the dealership is using any kind of excuse to not have to do any work at all. (Example - in 2010, broken ball joint on my 2009 g8 gt - they blamed it on my roto-fab engine covers hitting the hood, when in fact, it was a MAJOR TSB..) So a couple of things. 1) Where in DFW can I go to get this fixed 2) Should I even bother calling the GM customer care number.. because I am SERIOUSLY SICK OF "NO RENTALS BEING AVAILABLE" and having to pay for an uber. It's going to cost me $36 to get to the dealer tomorrow to pick the truck up. 3) Any other advise. Thanks in advance.

So this week I brought my truck into the dealership because of a ticking and squealing sound mostly when the engine was cold. After touching base with the service advisor the following day he notified me that the truck needs lifters and a cam. Parts have been ordered (5-7 days) and they will be doing the repair under warranty. The truck only has 69,000km (5.3L) and it doesn't take a beating. I get 13L/100km mileage. Thankfully the truck is still under warranty (5 year/160,000km), but I find it odd that the cam shaft needs to be replaced on the truck at this point. Anyone else dealt with a similar issue at this stage in their trucks life?

It's never too early to start talking about the process of shopping around for a dealer, pricing, the ordering process, deposits, and production delivery times. Although we're still months away from orders being accepted, this thread is meant to be a place where everyone can check in and share their experiences as they go through the process. I'm also going to document as many important dates in this initial post as I can. I'll attempt to keep everyone up to date on start of production, any ordering limitations, and when the ordering system will go live. NEW UPDATES AS OF: April 25th, 2018 T1XX- 2019 Chevrolet Silverado and 2019 GMC Sierra - Important Ordering / Production Dates Pre-Production: NOW - Captured Test Fleet Production Confirmed as of March 31st. Fleet Order Entry Avaliable On Crew Cab: 4/26/18 Double Cab: 6/21/18 Regular Cab: TBD Retail Initial Consensus Month Crew Cab: May 1st Double Cab: August 1st Regular Cab: TBD Initial Dealer Order Submission Process (DOSP) Crew Cab: 5/17/18 Double Cab: 8/16/18 Regular Cab: TBD Production Start Up For Dealer Delivery Crew Cab: Quarter 3 - July/August/September Double Cab: Quarter 4 - October November December Regular Cab: TBD 2019 Chevrolet Silverado Start Up Schedule 2019 GMC Sierra Start Up Schedule This post will be updated whenever new information becomes available. Please contact me if you can help clarify any of these dates.

Truck started to make a squeaking noise this weekend, took it to the dealership on Monday. Dealership called Tuesday and said that they could not find anything wrong with the truck and that this sound is normal. Take a look at this video so that you can hear and understand what I am talking about. https://youtu.be/aERzjGAX-aU Does this sound normal to you guys? I also put water on the belt and the noise was persistent so it does not appear to be the belt. Any help would be greatly appreciated!

I'm posting this in a few different Chevy forums in the hopes of getting our story heard and getting some kind of useful advice or even just feedback. So I apologize if you have already seen this somewhere else. So I'll TRY and keep this to somewhat of a minimum, but no promises. Thanks for reading all the way through if you do. I just need some feedback and/or advice. My husband and I went down to our local Chevy Dealership and traded in our old worn out 03' Dodge Ram on 12/20/16 for a 1 owner 2008 Chevy Silverado 1500 and paid a little over $16k. LOVE this truck. It's gorgeous, all the fancy bells and whistles, (On-Star, XM, remote start, tonneau cover, etc.), seems very well taken care of, and doesn't have super low miles but seems about average for an 08'. The previous owner had bought the truck brand new in 2008 from this Chevy Dealership and had brought his truck for ANY service to this dealership. So they had all the service records. So we felt good about that. When we bought the truck, we were obviously aware of the current recall on the Takata airbag inflaters and it hasn't been fixed yet, obviously. The truck did have a light on for the airbag and the Chevy Dealership told us it was for the SDM Airbag Module. They said they would not be fixing that because there is no current recall for the SDM module in this truck. And he's right, there isn't. I searched the VIN on GM and no recall for the SDM module. So with that being the only issue (besides the Takata inflators) we decided to buy the truck. Here is what has happened since the night of 12/20/16. When my husband was signing all the paperwork for the truck, it also included signing up for On-Star which was done right in the office. As my husband started his drive home with his new truck, he got an email from On-Star for his new account about 5 minutes or so after he left the dealership. As most of you probably know, On-Star does diagnostics on any vehicle they have in their system and will send the account holder a report of their diagnostic check. So he read his diagnostics report and it indicated that there was an issue with the trucks emissions. That was all it said. Something we were not told about by the dealership and at this point in time there was NO check engine light on the truck. Our salesman was out of the office the following day, Wed. 12/21, so we couldn't get a hold of him until Thursday. Late Wednesday night I tried to remote start the truck and it wouldn't start with the FOB (remote start will not work with the CEL active). We started the truck with the key and that's when we noticed the check engine light. Not even 48 hours after we purchased the truck. We called On-Star and they told us the code is P0430 which is Catalyst System Low Efficiency Bank 2. Which is an O2 sensor or the cat. When we called the dealership and told them what was going on, it took them at least a week to get the service manager to call us back and get the truck in to test the code. OK so took the truck down to the dealership, service manager tested the code and came back out and told us it read as the EVAP Vent Solenoid and that the valve flap was stuck open and causing a vacuum leak. Told us that we should have been smelling gas fumes. No we have not. At all. Never had a problem with ANY fuel issues at all. Of course we thought that sounded a little odd. My husband is not an idiot when it comes to vehicles and from what we've researched online, P0430 is a VERY specific code to the catalyst system. But of course we TRUSTED the dealership and their service manager. Maybe they knew something that we didn't about Chevy codes. So they said they would call us to schedule an appointment to have it fixed. About a week later (this past Thursday 1/5/17), we took it in to get fixed and we drove away with our loaner. Next day, we pick up the truck, service manager said they replaced the solenoid and the check engine light was off. He also told us that the problematic EVAP Vent Solenoid they replaced had no power to it and that when they took it off, the wires were crossed. How the hell does that happen..? Obviously wires don't just cross on their own. So it must have been replaced in the past by some dingle berry that couldn't figure out where the wires go and the dealership didn't have any service records on the truck for replacing the EVAP vent sol. OR that was just a flat out lie. We were past thinking this was odd. At this point, everything that had happened since we traded in our Dodge for this truck and they only gave us $100 for our Dodge to refusing to replace the SDM module to the back door locks working intermittently after a couple days to giving us the run around about getting it in to get fixed to shotty service records about not knowing if the SDM module had or had not been replaced even though they had records that the previous owner had brought it in at least 3 separate time because of the SDM module light..honestly, I never felt good about this deal when they only offered us $100 for our Dodge. It was a worn out work truck but it was worth way more than that. I didn't want to do it. I never felt good about it and always felt like we were being played. But it was my husbands truck, I wasn't there when he bought the Chevy so it wasn't my choice. I trust my husbands judgment 100%. FAST FORWARD TO TODAY 1/10/17. The truck had been in the shop this past Thursday and Friday. It is now Tuesday and my husband was out in the truck and called me to tell me THE CHECK ENGINE LIGHT CAME BACK ON! He called On-Star and SURE ENOUGH, it's P0430. Same. Exact. Code. Hence the title I wanna drive the damn truck through the front of the effing dealership. He has called the Dealership about 5 times already and of course, no one is available. Not our salesman or anyone in the service department. Go figure. Only thing to keep in mind is we bought this truck USED and was classified as AS-IS sale. We knew that and were fully aware. BUT we are 100% certain that the definition of AS-IS does not include them make us FALSELY believe that the truck did not have an emissions problem, or ANY problem other than the SDM module. They specifically told us the only issue the truck has is the SDM module. The way this has worked out (On-Star emailing the diagnostic report literally 5 minutes after leaving the dealership, the code was already in their system) they HAD to have reset the check engine light on the truck probably when they brought it around for my husband to test drive it. They did not disclose that to us. They led us to believe the truck was in GREAT working condition and had we known about the emissions problem, we could have better a BETTER more ACCURATE decision on buying this truck. Or we could have negotiated the price and getting it fixed before deciding if we still wanted to buy it. They disclosed everything except for this emissions problem and the back door locks. And NOW even after they said they "fixed" it, the check engine light is back on which makes me think they just fed us a bunch of BS and they just reset the CEL light again to shut us up and stall us until we can no longer return the truck, imho. Buying AS-IS means you know EXACTLY what you are getting. We were deceived. Hands down 100% I believe they were completely deceptive and knew exactly what they were doing when they sold us this truck. So I'm not really sure if I actually have a question. At this point, my husband is already getting the phone numbers for Wells Fargo, our financier, for GM Corporate offices or complaint department who ever we need to call there, for the Attorney General of PA, and whoever else we need to contact. Unfortunately, they aren't BBB accredited so that's not an option. Any ideas, Thoughts, advice, similar stories, feedback for me?? Anything would help us figure out what we are going to do. Sorry it's SO long but THANK YOU so much for anyone that actually read the whole thing and is willing to give me some kind of feedback. Much appreciated!!

I have a new 2016 GMC Canyon and I am pissed! Yesterday on my way back from the first service to get my oil changed, i was left stranded, when the vehicle broke down due to the oil having leaked entirely from the engine. By the time I was able to safely stop the car, the engine was making a distinct metallic noise. I was left waiting in the heat (it was 95 yesterday) for almost two hours while Earnhardt GMC here in AZ tried to figure out what to do. Eventually a tow truck came and my truck was taken back for service. I was eventually told that the oil filter was not installed correctly leading to the engine being left with no oil. Today the Service Manager Joel called to say that here are no issues with the truck and that all is fine. I am not entirely convinced that this is the case and they did not offer to guarantee that the car will not have a problem in the future as a result of this. They told me that I can rest assured that all is well with my truck. I called GMC customer service as I was hoping that someone could advice if I can trust the advice I am receiving from the dealership is correct. I was told that I should go back to the dealership to seek that kind of reassurance and that in the words of Ruben, one of GM Senior Advisor, "this is not an issue for GM". I was really excited about my truck and in the space of less than 24 hours I have come to lose trust in Earnhardt and GM. What should I do? Do you guys think that the engine is shot? Or should I just be ok with it? Thank you for your advice! Joe

What do you guys and gals think of the dealership surveys GM sends out after purchasing a new vehicle? My dealership seems to be obsessed with giving them top marks. Yet I think they've lost the true purpose of good sales and service. Especially service. As I was being walked back to my vehicle I was asked to complete the survey with good marks for the service, although the service wasn't even completed yet. Seems like a lot is riding on these surveys for the dealership, causing the sales and service to decline. just my two cents.