Search the Community
Showing results for tags 'power mirrors'.
Found 4 results
-
I'm new to the forum. I have a 2006 GMC Sierra 1500 Crewcab 4x4 SLE. My problem is somewhat intermittent. Mostly on rainy days the drivers door lock and all of the controls on the drivers door will not work until in unplug the unit for a few minutes, then it will usually work. Also this is an old company truck that was used in a limestone quarry for the last year or 2 before I bought it. My question is, if unplugging the switch assembly gets everything to working again, is the switch assembly the likely culprit causing the issue or is it possibly something else? Any help will be greatly appreciated. This truck has heated seats and memory for the seat and mirrors. The mirrors are also power folding and auto dimming with turn signals. One additional note is that the power drivers seat and seat heaters for the drivers seat have not worked in quite some time. Thank you for any help.
-
Hello Recently purchased 2014 GMC Sierra without power mirrors. Wanting to know if I can add power mirrors? I see the switches on eBay. And is it simple like plug and play? -
Hi everyone. First time on this forum. Looking for some help and advice. I have a 2003 tahoe. The current mirrors have nothing except power adjustment. No heat. Not folding. No signal. No pot light I just bought some 2003 tahoe mirrors that gave all that My question is, will this be a plug and play installation? I hear 2003 switched to new harnesses. Any idea if my tahoe will have the correct harnesses to hook these up? I also believe that I will need to hook up a separate switch and power to to get my mirror to fold in. Any help would be greatly appreciated. I look forward to hanging around the forum! -
Got a 2006 Suburban 2500 LT that came with power folding, heated, blinker, self dimming mirrors and swapped to a set of OEM power extending tow mirrors with blinkers (not sure about the dimming & heat). They will extend by pushing the rocker switch to the left side but they will not retract by pushing on the right side of the button (Left/Right rocker switch in the middle position). Is there anything that needs to be done so the ECM or equivelant will recognize that the mirrors have ben changed?
