Search the Community
Showing results for tags '2017 z71'.
Found 2 results
Hello I got a baffling problem with my 2017 Chevy Silverado 1500 LT with the 5.3 L and Z71 package in it. I got a U1510 code and U1501 code. The U1510 says it’s a LIN on bus communication issue. Now this was about the end of August when that happened. Looked at a few things couldn’t really figure it out and didn’t have the time to look because the truck seems to be running fine. About 4 days ago my service brake trailer starts flashing on my dash when I’m not even towing a trailer (the last time I did was about 5 days before this). Now I take it to my step father who owns a garage and has worked on chevys for years. Now the U1510 code is still there when we scanned it but the U1501 code is gone but now on top of those codes there’s a U1037 code which is lost communication with trailer brake control module, P0562 which is low system voltage for Chasis Control Module, B127E code which is Front video display output signal, and C0800 code which is control module power circuit below voltage threshold for the power steering control module. The truck driving it runs perfectly fine, nothing abnormal at all. So thinking the trailer brake might be a separate issue we checked that out all the wiring etc and nothing wrong with it. So for the other codes we went and checked all the grounds on the truck thinking it might be a ground issue and all them seem to be good. We are starting to think maybe it’s a PCM, ECU problem because of all the random codes being thrown in every direction as well as codes in the system before disappearing. Any advice or help would be appreciated!!
2017 Chevy 1500 Tires and wheels fitment
CanMan34 posted a topic in 2014 - 2019 Silverado & Sierra07/12/2020 Hey everyone, I'm new to the game. I understand tire sizing but not fitment regarding clearances with aftermarket wheels. Looking for some advice. I know that I would like an aggressive MT in 33's. I'd like to get new wheels because I absolutely hate the stock polished aluminum 18's I have right now. I'd like to get 289-295/70/18's but I'm not sure if that would fit with wheels with a -24mm offset and still have enough clearance in the wheel wells to turn completely without rubbing. My plan is to get the MotoFab 3 inch front leveling kit (strut spacer) before I go and by wheels and tires. If you've done something similar, I'd love to hear form you. If you know of a good way that I could figure this out without buying everything first to test it, that would be great too. Thanks in advance! 07/13/2020 Quick update: I've spoken with a friend of a friend who knows WAY more than myself about lifting trucks and the fitment of aftermarket wheels and tires. First off, he suggested that I don't put in a 3 inch strut spacer kit. His reasoning was that I'd be replacing ball joints, CV shafts, wheel bearings, ect. His rational was that the spacer would through the angles off too much and put excessive wear on many parts. He also said I could go through and change out the upper control arms to attempt to correct the angles a bit (at that point, I'm thinking, well if I'm going to go that far I might as well just wait and buy the real lift kit that I want). Another point he brought up is that if I were to put the 3 inch spacers in, it may through the alignment off so much that there wouldn't be enough adjustment in the stock tie rods to make the proper adjustments needed to complete the alignment. So now I'm just in the process of re-evaluating what I want to do. Stand by for another update soon to come.