Search the Community
Showing results for tags 'RST'.
-
Only joined to spread the word. Like most of you I've been frustrated with the horrible interior lighting without easy fix. I also wasn't willing to have holes drilled in my trim pieces, or lose any functionality of my switches or courtesy lights. If that's of interest to you, I'll try to include screenshot of item since links die, and hopefully enough pictures to get you through so you don't have to spend multiple hours testing circuits to figure it out. The good news is the rear dome lights are so easy to do. Take the rear dome assembly down and take it apart. It's only held up with clips and a small pry tool to get it apart. Remove the 2 fresnel lenses out and put it back together. That's it. Probably 3X the usable light from the rear domes with a nice even spread. The front assembly is quite a bit harder. I'm not going to explain how to remove the assembly and take it apart, there's plenty of videos online. For this mod I ordered some neutral white 3/4inch clearance lights from Tecniq. They have a real nice pattern to them and plenty bright. I needed a way to power them so I used some mosfet trigger modules. Probably 10 bucks in parts if I didn't over order for another projects. I needed some diodes to prevent feedback and keep the bcm safe. I had some on hand. DONT FORGET THE DIODES. I removed the fresnel lenses from the front as well. I took everything apart and with a Drexel 'gently' made the leds fit roughly in the same position as the factory holes. It doesn't take much. I had to trim a bit from the bulbs as well. There's a tiny spot on the pcb board that produces 4 volts on either side corresponding to the lights. If your not comfortable soldering, it's pretty small. Next I routed the wires from the led through the holes directly behind them. I did have to cut some of the rubber out, but be careful not to take too much. Once the pcb was back in, I ran the wires towards the rear and again used the Drexel to make room on the back piece for them to come out. Then I wired them to the mosfet modules. You might have to knock the tiny led off of the module. It's a tiny power draw but these module are meant for 5 volts and we're working with 4V. Mosfet module Requires Vin, Gin, Vout, Gout, trigger, and trigger ground. I place the diodes in the the Vout. Make sure the orientation is correct. Module power out to led. Pigtailed Gin to trigger ground. And made some quick disconnect leads for the power in. I connected to power and ground directly to the wiring harness via t-taps. I know people have said you can mess up the bcm that way, but considering the leds only draw 40 mA @12V each I wasn't worried about it. Connected ground to number 5 pin on the grey harness. I'll have to apologize, I don't remember which wire I connected in the harness for power. It was late and I was very frustrated. I initially connected to number 14 but I lost some functionality. There was another wire that hade 12v power at all times and I hooked it up there. I believe it was pin number 10. Anyways I hope this helps. I know gm dropped the ball on these truck for interior lighting. Mine are so bright now I have zero issues. Have full view and it's bright enough to see everything. The lights up front don't shine at my eyes, and they light up the floor. I'm not even going to do the floor lamps now! 10/10 upgrade! P.S. I'm going to throw some pictures of the interior up here so you can see the bightness. Don't judge, she's a work truck! Lol ANMBEST 10PCS DC 5V-36V 15A(Max 30A) 400W Dual High-Power MOSFET Trigger Switch Drive Module 0-20KHz PWM Adjustment Electronic Switch Control Board Motor Speed Control Lamp Brightness Control https://a.co/d/19L4oGi https://www.ebay.com/itm/292380373219
-
Anyone else experiencing a hard shift or hesitation of the engine when you first hit the gas. For example, I start the truck, reverse out of the driveway, put the car in drive and when I hit the gas, the truck goes toward and then i feel the truck completely stop for a second (hesitation) and then it continues forward, I only expierence this when I’m going from reverse to forward. I come to a complete stop and do not shift to drive when moving backwards still. ?
-
Bought this vehicle brand new. I love it, and perfect for myself, my family, and the fact it's Diesel puts the cherry on top for me. But... now things have started. We have currently 1,137 miles on the vehicle and had the first message populated: - Service steering column lock. (see photo) Everything else worked, remote start, standard start, and the vehicle had zero issues. The following day from our road trip, we had to go to the DMV with our out-of-state paperwork to submit for plates. My wife now received a new message. - Service emissions system. See owners manual. (see photo) She drove to the DMV and left to get the smog paperwork. Then a new issue: - Vehicle remote start isn't working. (see photo) She is in the car and tries to start... Nothing. She tries again. It starts, and she drives it to a local dealer. They come to look and scheduled us for an appointment. She drives the vehicle now, and Onstar now shows the emission issue. ( see photo ) We now can't register the vehicle in California, because, the check engine light is on, emissions warning, and they won't smog it until it's corrected. Awesome... I noticed that none of these issues happened until it updated the software in the vehicle. I'm hoping this is something that can be fixed. I've been looking around for answers and only finding more issues that are all pretty shitty. Sorry, no better way to say it. I've also seen a post of people saying, “deal with it, it's a new breed of vehicles,” etc. I’d challenge that answer. No one should pay this much for a vehicle and face these issues I'm reading about. So here's what I'm going to do, document everything, and I mean everything. This will be for everyone who may have this issue now or who may come across it. My opinion...but I'm not a mechanic, is that there is a massive software and hardware issue with these models. I believe GM internally has to know about this from Dealers, Customer Service, Compliance Reports, etc. I'm sure all issues are in the queue to be address or fixed. I do, however, feel with the challenges of physical hardware that they chose a vendor that was most cost-effective, which is a component of these issues a long with the capability to support the software complexity of the current models. Or maybe I'm just wearing a tin hat, who knows. So, I open this up to you. Any advice, similar issues, outcomes you've faced, and other topics, please comment below. May the journey of dealership visits begin. Hopefully, this journey isn't to long.
-
I've had my truck for 10 days. Many things are great , it's the 2021 Crew cab, 5.3ecotech v-8 RST Z71. I now have 670 miles, none off- road. I traded in my 2006 Z71 at 168,000miles. This new truck has alot of rattles, I wasn't expecting that. What is it? It's coming from the middle or rear of the truck. Maybe the back seats and or the tailgate. Another rattle is up front around the brakes or tires. Anyone else have this going on?
-
Hey everyone! I have been browsing the forums for about 6 months now and finally pulled the trigger on a 2020 RST about 3 weeks ago. I am looking to get some black wheels with some all terrains before winter. I am leaning towards OEM black wheels of some type as I have had better luck with OEM wheels holding up to these Minnesota winters. Does anyone have these 18" OEM wheels (84641199)? I would love to see these on a vehicle! I was also thinking of finding a set of Trail Boss wheels but I don't care for the looks of those as much. Lastly I found a few of these sets on Ebay, they appear to be my current wheels but in Black. I can't seem to find anywhere saying that these came from the factory in Black, but I think they look great! Thanks everyone!!
-
Just plasti dipped my badges on 2020 Silverado RST 1500. 5 coats of matte black and 1 coat of glossifier. Waited 15-20 min between coats. Super simple to do. Let me know if you have any questions. BTW the tailgate Chevrolet lettering is BD Trims domed letter inserts, black with red outline.
-
I finally bought myself a big boy truck after owning a lot if sports cars and a Wrangler. Found a smoking deal on a new 2020 Silverado RST Z71 with all the options I wanted. I've never been so pumped for a vehicle, it's the first new vehicle I've bought myself. Cheers Gents!
-
So what's the biggest tire we can run on a leveled Silverado with aftermarket rims that will stay flush with the fender or tucked a bit? I'm looking at some black rhinos or methods that run 18x8.5-9 with either 0 offset or +12. I'm hoping to get some 285/75-R18 all terrains to fit. I'd rather buy online as it's cheaper than the local wheel shops
-
When the T1 fist appeared I obviously was attracted to the TB. But after awhile and building all the models online the 2in lift didn’t really seem worth it. Then they announced the 6.2 and i6 comes in the RST and I can put my own lift/wheels on later. Also 18’s are to small for this truck imo I can live with the stock 20’s for a little. I feel like the RST is a better buy if you plan on modding your truck. If you like the 2in lift the TB is fine. With the new updates to the 20’s with engine trims and other things. Are you gonna trade in your 19? I’m sure the dealers won’t mind a truck with 1-10k miles and you probably wouldn’t lose to much $. I’m patiently waiting like everybody for the i6 to show what it’s got. I’m very glad the 6.2 will also be offered as a 2nd choice but I’m 85% committed to the baby Dmax?
-
I would like to change the regular bulbs in my Front turn signals on my RST to LEDs. Does anyone know what bulbs these are (they are marked 855)? Any recommendations on LED's that won't require resistors?
-
Hi there - first time posting here, I figured this would be the place to go. I am currently looking for some rear seat covers for my 2019 Silverado RST Crew Cab. So far, I've had no luck finding something that still allows me to utilize the rear seat folding compartment (cup holder). I have 2 kids under 2 and i am desperate need of them, they have already done a number to my SS and don't want it on the RST lol! Thanks in advance
-
Zane Merva Executive Editor / Publisher - GM-Trucks.com May 24th, 2019 A few days after we got a look at the changes for the 2020 Sierra, Chevrolet is letting on to what's going to change for the 2020 Silverado. Surprise, it's actually some significant stuff. More 6.2L First up, the 6.2L makes its long awaited move to trim levels below LTZ. Now Custom Trail Boss, RST, and LT Trail Boss trim levels can also order the 420 horsepower engine option. As owners of a 2019 LTZ with the 6.2L , we highly recommend it. More 10-speed LT Trail Boss and High Country with the 5.3L engine will upgrade to the all new 10-speed transmission. This move was more expected as GM flushes out the 10-speed into more models and slowly phases out the 8-speed and 6-speed transmissions its sold for years. A New 3.0L Diesel The new light duty Duramax makes it's debut in 2020. It will be available on LT, RST, and above trim levels. This engine will also come with the new 10-speed transmission. Smaller changes Other additions to the lineup for 2020 include adaptive cruise control and a new "transparent trailer" camera system that displays up to 15 different views. Order Guide Deletions (GE0) Oakwood Metallic (PDT) High Country Premium Package (R13) WT Appearance Package New Features (DPO) and (DQS) Vertical Trailering Mirrors (KSG) Adaptive Cruise Control now included in (PDJ) Safety Package II Changes (MQB) 10-speed transmission is now standard on 4WD High Country models with (L84) 5.3L EcoTec3 V8 DFM engine and LT Trail Boss (UV2) HD Surround Vision is replaced with (UVS) HD Surround Vision with Two Trailer Camera Provisions (CWM) Technology Package now includes (UVN) Bed View Camera (PCV) WT Convenience Package is now available with (ZW9) pickup bed delete (PTT) Tire Pressure Monitor System becomes (PTT) Tire Pressure Monitor Sensors (V46) and (VJH) Chrome bumpers are now free flow on 1WT (Q5U) 17" Bight silver painted aluminum wheels are now free flow on 1WT 2020 Chevrolet Silverado Photos
- 34 replies
-
- 2020 silverado
- 2020 chevrolet silverado
- (and 10 more)
-
John Goreham Contributing Writer, GM-Trucks.com 11-9-2018 Chevrolet is building upon its huge sales success of the new generation Colorado with two new special editions. GM credits the Colorado and Canyon with helping the company to become the largest seller of pickups. “The success of Colorado helped reignite the midsize truck segment, which increased 27 percent from 2015 to 2017,” said Sandor Piszar, director of Marketing for Chevrolet Trucks. “It changed what customers expected from a midsize truck, brought new customers to Chevrolet and has inspired competitors to follow Chevy’s lead.” The first Colorado special edition is a street-focused RST is based on the LT trim. The new RST features a monochromatic exterior offset with a black beltline and body side moldings. The RST also adds a black tailgate bowtie, Colorado and RST badges. The RST becomes first Colorado trim to offer 20-inch wheels, finished in low-gloss black. Like the Bison, the RST will wear the flow-through “CHEVROLET” lettered grille. The new Colorado Z71 Trail runner begins with the Z71 package and adds the Colorado ZR2’s underbody protection and rubber. These include aluminum front and mid skid plates, functional rocker protection and Goodyear Duratrac tires. With this new trim, Chevrolet offers four distinct Colorado levels of off-road capability: - Colorado Z71: Z71 Off-Road Suspension, automatic locking rear differential and unique 17-inch painted wheels and all-terrain tires. - New Colorado Z71 Trail Runner: Adds additional off-road protection to the Z71 trim with the Colorado ZR2’s front and mid skid plates, rocker protection and 17-inch Goodyear Duratrac tires standard. - Colorado ZR2: Compared to a standard Colorado, the ZR2 features a factory-installed 3.5-inch wider track and a suspension lifted by 2 inches. Class-exclusive features include front and rear electronic locking differentials and Multimatic DSSV Dampers. The ZR2 also features front and mid skid plates, rocker protection and front and rear bumpers modified for better off-road clearance. - Colorado ZR2 Bison: The ZR2 Bison adds even more extreme off-road capability with five hot-stamped Boron steel skid plates and stamped steel front and rear bumpers with front winch provisions and rear recovery points.
- 4 replies
-
- rst
- trail runner
- (and 4 more)