Search the Community
Showing results for tags 'highway'.
Found 2 results
-
So I'll make this topic as detailed and informative as I possibly can because I'm running out of options here. Video of the issue is included. I did a coolant and radiator flush on my '03 Sierra 5.3 to change the coolant from green ACDelco to orange Prestone. All the old coolant was flushed out of the engine and in with the new. The radiator was bled properly. After driving around for a while, I noticed my temp gauge starting to rise just above midway on the highway, and I can hear the fans kicking on high (did an electric fans swap). I didn't think much of it, but then it refused to cool down even though both the fans and the outside air are blasting through the radiator, and I know that the radiator is clean because there was no corrosion on the inside or outer debris blocking the airflow. I took it back to the shop, reflushed it, bought a new OEM thermostat, nothing helped. As a last resort, I did the following things to make sure everything is working correctly, and I'll mention some notes: *Thermostat has been replaced *Coolant was changed back to green 50/50 ACDelco, which faired a bit better than the orange Prestone. *Changed the temp sensor and its wiring *Bought a new fan harness from Nelson Performance because the old one got busted from how long the fans were running on high. *Radiator hoses were inspected, nothing is cracked or kinked. *Oil is not milky, nor getting smoke from the exhaust, and I'm not losing coolant, so no head gasket issues. *Car was running fine before the flush. *The car isn't drastically overheating, but there's no reason for the temperature to rise on or above midway when I'm cruising down the highway, and this will make the fans and the harness run harder. *This only happens after I push on the gas or the engine is underload such as cruising on the highway. *Sometimes when the car is idling, it takes awhile for the low fans to turn off, as in, it is cooling down slower than usual. The only two things that are left to suspect are the water pump (not leaking or making noise though), and that there is an air pocket trapped in the engine, and I'd appreciate if someone tells me how to check if there is one. If this behavior is normal, which I'm sure it isn't, please let me know. Here's the video. When the temp begins to rise I'm cruising around 55mph, and only cooled down when I came to a stop and slowly took off again. https://youtu.be/J5jeolKdtc8 -
I purchased a 2014 gmc 5.3 with 80k. the lifters were all replaced under warranty. soon after i noticed 10 psi oil pressure after driving 25 min on highway. dealer replaced oil pump still has 10 psi after 25 min of driving. when i first start up its at 40, oil pressure goes to 70 when rpm exceeds 3500 rpm. oil pressure starts to drop to 20 after 10 min and seems fine. after 25 min it drops to 10 on guage. i had oil pressure checked with mechanical guage and confermed guage is accurate. i asked dealer to che k the screen under oil pressure switch they said it was clean. at this time dealer says nothing is wrong due to specs at 1000,2000,3000 rpm. i called gm customer care and they said to get different dealer to look at. i did and they confermed rpm at different rpm and charged me 118.00 gm customer care did nothing to help me out. i have never seen any truck with 10 psi at idle. does anyone else seem to have this issue?
