Search the Community
Showing results for tags 'lightbar'.
Found 17 results
-
here are some picture and videos of how i installed my upfitter aux switches to my 2017 silverado Texas edition truck which DID NOT com with them nor does it have the relays fuses or switch wires in the harness. keep in mind the switches are GROUND or NEGATIVE switching. which means they DO NOT HAVE 12v ON THEM. DO NOT PUT 12V ON THE WIRES YOUR ABOUT TO INSTALL. i had to get a new connector from a crashed truck in a junk yard which i then pulled 4 of the pins and wires out of to install into my trucks harness plug for the upfitter switch. once i did that it was just a simple act of making a short extension wire from those 4 wires coming from the harness plug to go to the driver kick panel where im going to locate the relays for the devises i want to control. you will see the harness plug and wires where i put them. and you will see the JST plug i used to connect the 4 wires to the extension wire to run to my relays. will also upload videos soon.
-
Has anyone added reverse lights on 2019-2021 sierra? I need ideas!!! I was thinking about rigid ignite flush mount. Show me what you did!!! thanks!
-
Sold
-
I have a Go Rhino sport bar in transit, I believe I will be purchasing (5) Q Series LED pod lights from Rigid Industries. I'd love to see how others have ran their conductors for power, fuses, disconnects, and cab / interior switch setups. Any and all pictures , and information are greatly appreciated. Youtube and forum searches have been mostly a bust. Interested in what lights you all are running? 2016 Silverado Z71 LT Crew Cab
-
Hey guys, yesterday I had just gotten a 54 inch curved led lightbar installed with a simple toggle switch. After the install on the trip back home on the interstate, I was greeted with a very loud and annoying whistle/humm from the drivers side speakers. It wasn't like this before the lightbar install. And it creeps in about 45mph and gets drastically worse at higher speeds. It is not wind noise, it comes with static from the drivers side speakers. Any tips/dui help would be much appreciated as I do not feel like making the 50 minute drive back up town to fix maybe a simple issue. Any help would be appreciated. -
Hey everyone new here to the forum I have mounted a lightbar to the front of my ranch hand brush guard and have a relay switch. I need y'alls opinion on where the best place/ if there is a place to run the wiring through the firewall. If anyone has any knowledge or could direct to a thread I would greatly appreciate it.
-
Hello everyone, Looking to add a light bar or other accessory behind the grill of your truck? For those of you with a 2014 or 2015 Silverado or Sierra, this is for you: I have for sale a set of billet aluminum mounting brackets that attaches to the supports behind the grill. The mounting hole is threaded 1/4-20, all parts are black anodized aluminum and unlike the picture will include stainless fasteners (no rust). I've been running a set for some time now and it works great. No drilling, welding or trying to zip-tie stuff on. Bolt on the bracket and you have a standard 1/4" thread to work with. If you remove the brackets, there is no trace anything was ever there. If you are interested in the brackets please PM me, I accept PayPal, $150 + $20 shipping anywhere in US and Canada. Note: In the picture below, the bracket I am referring to is the square block attached to the angled support. The other piece between my light and the block is not included. Thanks
-
Anyone got the color's and location of all the proper wires I need to tap into for the running, brake, right & left turn and reverse? Thanks.
-
From the album: LED Light Bar
-
My 32" lightbar just came in the mail. My original plan was to use the Nfab mount that comes out of the tow hooks and goes up. I put it on my truck and I just don't like the Nfab mount. So I am looking to do what I found in the picture. I need some info on how this was actually mounted. Please help. I'm like w kid on Christmas except I can't really play with my toy until I figure out how I am going to mount it.
-
Hello! I have for sale this Rigid Industries SR 20 (Combo Spot/Flood beam) in excellent condition. Model # 92031. I bought this for about $550 when new a year ago or so. Will come with the wiring harness and original box! Asking $400. Text is preferred, but feel free to call or e-mail also. 765-210-6254. [email protected] Don't hesitate to contact me with any questions. Thank you! Here's a link to the product on the manufacturer's website for more information if needed! http://www.rigidindustries.com/led-lighting/92031 I will also include the 2 clear covers. I have the mount brackets which fit in the bumper of the 2011-2014 Chevrolet/GMC 2500's if interested. http://www.rigidindustries.com/mounting-options/40339
-
From the album: 2004 Silverado Build
Alittle more than a year after the truck is looking mint!, 2.5" lift in the front, add leaf in the back, (1.5"). HID head lights, 30" light bar with a custom fabed girl mount I constructed, colour matched mirrors, debagded/no moulding tinted lights and windows, Brand new Dynapro MT 34.5/12.5/17" tires. new chrome wheel studs, Cold air intake, Straight pipe exhaust out the cats, Hypertech tuner, wires and plugs, new brakes all around, And the list goes on! -
From the album: 2004 Silverado Build
Alittle more than a year after the truck is looking mint!, 2.5" lift in the front, add leaf in the back, (1.5"). HID head lights, 30" light bar with a custom fabed girl mount I constructed, colour matched mirrors, debagded/no moulding tinted lights and windows, Brand new Dynapro MT 34.5/12.5/17" tires. new chrome wheel studs, Cold air intake, Straight pipe exhaust out the cats, Hypertech tuner, wires and plugs, new brakes all around, And the list goes on! -
From the album: Chevrolet Silverado (1)
Feniex Industries LED Apollo Interior Lightbar ~ Taken at Westborough State Mental Hospital ~© @NickZ71 | www.nickz71.com
-
From the album: Chevrolet Silverado (1)
Feniex Industries LED Apollo Interior Lightbar ~ Taken at Westborough State Mental Hospital ~© @NickZ71 | www.nickz71.com
-
I'm thinking about pulling the trigger on a 50 inch opt7 lightbar. Anyone have any experience with them? I've read nothing but solid reviews, just curious if anyone has used them before.
-
Rigid Indistries bumper mount, had it on my silverado but ive got a sierra now and they arent interchangeable....who knew. Anyways it retails for $70, Id like to get $50 for it. Let me know! Fitment: Chevrolet 1500 (2011-2013), 2500 / 3500 (2007-2010) Bumper Mount
