Search the Community
Showing results for tags 'struts/shocks'.
First post here. I’m looking to purchase Bilstein 5100’s for my 2019 Silverado LD, but would like to know if the 2019 LD has the same suspension/specs as the 2018 Silverado 1500. I know the LD is a remake of the 3rd gen 1500 but want to make sure the Bilsteins install right. Any info on this would be greatly appreciated.
Looking for suggestions on front coilovers for 2014 SIlverado 4x4, I currently have a 3" motofab level kit installed including aftermarket Motofab UCA (Which I am not happy with and will be swapping out) Nevertheless I would like to maintain the 3" lift but go away from the spacer to a coilover kit without breaking the bank. I have been looking at the following and interested in feedback outside of going to a full blown 4" lift which I'm trying to stay away from but not opposed too either. Also to mention this is my daily driver so more on road than off road use. Bilstein 6112- won't get me to 3" only 2.75 at highest setting (maybe) Eibach Pro-truck Coilovers 1.75-4" $850 which I'm leaning towards due to price but not familiar with the coilovers I know Eiback makes a good spring which is used on several other brands including FOX Zone Coilovers 0-3" around $2K to purchase (Ouch) Icon 1-3" Coilovers about $1720 these are just a few I have researched but open to thoughts and suggestions and looking forward to the feedback, I'd like to stay under a thousand if possible.
I know the 6112s are semi-new to the community. My question is what would be the lowest possible notch I can install these and still have enough clearance to fit 275X 65R 20 KO2s. I’d imagine the notch settings are similar to the 5100s accept there is 1 extra notch I believe. I have been searching online for the past week and cannot find anyone that confirms the lowest possible setting to fit these tires. I know I can install them at the highest setting and fit just fine, But I am trying to keep rake in the rear due to occasional towing and i do not want to add a leveling block to the rears. I was thinking the third notch (1.25” of lift) would work but I’m not sure if It will get rubbing. Does anyone have any idea on this? I currently have a 2.5 inch leveling spacer but do not want to install it when I switch to the Bilstein 6112s. Thanks!
I recently purchased the rough country 2.5in lift and 33in BFG all terrains for my 2016 Silverado about 15k after my lift install I developed a noise from the front driver side suspension and the noise is noticeable on rough terrain at slow speeds or anything other than smooth pavement a local shop couldn’t find anything wrong with it any advice is needed for an example it sounds like there is play in the strut but the shop I took it to checked all the bolts