Jump to content
  • Sign Up

5" Rcx Lift On Nnbs Rcsb


Recommended Posts

Posted

Hey guys,

 

I'm looking to order this kit and had a few questions before hand. I'm hoping you guys can help!

 

Has anyone installed this kit that had the manual floor transfer case shifter? Will this effect the normal installation at all?

 

My truck has the 4.3L V6 so I figured if I stayed with 33x12.5R20 tires it shouldn't be to bad, would it? I previously had 305/45/22 which are just short of 33x12, and the truck still responded well.

 

On the RC webpage it states that this kit is 5" in the front, and 5" blocks in the back. In the instructions for this kit it states it is a leveling kit which uses 5" lift up front and 3" blocks in the back. Can anyone verfiy which is correct?

 

I'm sure to have more questions but all I can think of for now.

 

Crappy phone pic with the 305/45/r22's

 

sierra.jpg

Posted

The kit takes it up 5" in the front and 3" in the rear. The stock rear blocks are about 2", so the new ones are 5" giving you 3"in the back. The truck will sit pretty close to level.

Posted
The kit takes it up 5" in the front and 3" in the rear. The stock rear blocks are about 2", so the new ones are 5" giving you 3"in the back. The truck will sit pretty close to level.

 

 

yes and 33x12.5 is the optimal tire size for this setup. wont really clear any bigger

Posted

Are there any major differences between the rough country kit and say the bds or fabtech kits?

 

I know different heights, but I'm going to stick with 33" tires because of the v6 so getting extra height out of one kit or another isn't a big deal to me.

Archived

This topic is now archived and is closed to further replies.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.