2014+ Leveling Kits

[Scooter Scott 40]

So after a 2" level and ReadyLift control arms, I do get a very slight rub on the upper control arms.  Has anyone extended the steering stops to keep from full lock hitting the arm?  It would not be that much so I don't think it would be that much of a problem for the turning radius.

[Scooter Scott 40]

On 2/5/2019 at 8:45 AM, wepiii said:

Thank you! Do you have the aluminum control arms or stamped steel? What size level? Also, any way you could post a picture?

I have a 2018.  These comes with stamped.

[wepiii 8]

28 minutes ago, Scooter Scott said:

So after a 2" level and ReadyLift control arms, I do get a very slight rub on the upper control arms.  Has anyone extended the steering stops to keep from full lock hitting the arm?  It would not be that much so I don't think it would be that much of a problem for the turning radius.

Are you 100% it’s the UCA’s. I was positive that is what mine was rubbing, but it was actually hitting the sway bar. Most noticeable hard right going forward. I have 275-60/20’s and I scrub the sway bar, I’m not sure how you wouldn’t with an even taller tire. Mine is a 2018 as well so same UCA set up

[Scooter Scott 40]

4 minutes ago, wepiii said:

Are you 100% it’s the UCA’s. I was positive that is what mine was rubbing, but it was actually hitting the sway bar. Most noticeable hard right going forward. I have 275-60/20’s and I scrub the sway bar, I’m not sure how you wouldn’t with an even taller tire. Mine is a 2018 as well so same UCA set up

Honestly I didn't look on the back side I was only looking on the front.  I'll take a look at that and report  back.